Fusion Key for Mustang
#47
It would be really cool if we could replace the ignition switch with this
http://media.ford.com/article_displa...ticle_id=27869
http://media.ford.com/article_displa...ticle_id=27869
#50
Now don't blame me, I can only confirm that it works on an '08 I've heard it works on an '07 but have no experience with it. I do know that it does not work on 05 and 06's.
Best thing is to try the RKE, because the ignition should work on any year, but the RKE doesn't. So if it doesn't just sell on ebay or to someone with an '08.
Best thing is to try the RKE, because the ignition should work on any year, but the RKE doesn't. So if it doesn't just sell on ebay or to someone with an '08.
#51
i AM going to blame you if it doesn't work!!! it will be ALL your fault. j/k
i won't blame you. i didn't mean for it to come across that way. but, i just hope it works. would be great to be able to lose the extra remote.
i won't blame you. i didn't mean for it to come across that way. but, i just hope it works. would be great to be able to lose the extra remote.
#58
too lazy to hunt down my owner's manual. found this on the web. is this how to re-program the PATS on the mustang?
If you want to add a key....
**You must have two original keys to perform this procedure. If you only have one key, you WILL have to take it to the dealer to get it programmed**
1. Insert and existing (working) key into the ignition cylinder.
2. Turn the ignition cylinder ON (RUN) and back to OFF. Ignition should stay on for at least ONE SECOND.
3. Remove the existing key and, within TEN seconds, insert a second working key and turn it to ON (RUN) and the back OFF. Ignition must be in ON for at least ONE second, but no more than TEN seconds. Remove the key.
4. Insert the new key before TWENTY seconds have elapsed and turn it to ON (RUN). Leave it the ON position for at least ONE second and turn back to OFF.
5. The security light will light up for THREE seconds to indicate that the new key has been successfully programmed.
6. To program additional keys, repeat steps 1 through 5
#60
About a year or so ago, somebody posted here about how he combined his key with the remote fob after removing the black plastic head from the key and digging the little transponder chip out. It took a bit of work but it looked really slick (like the Fusion key) and would definitely work for the '05s -07s.
Last edited by Vermillion06; 3/17/08 at 11:32 AM.