Body kit or not to body kit?
#23
Opinion
You ok... Nothing wrong with a stock looking foxbody
#24
Join Date: December 5, 2006
Location: Trapped in Minnesota
Posts: 31,620
Likes: 0
Received 70 Likes
on
66 Posts
Have you seen this one with the saleen body?(from the timeline) Now this one I can honestly say I love! I have seen a couple notches w/ this spoiler in person though, and it's not all that pretty. It looks good from the side, but it's kinda ugly from the back.
#26
FR500 Member
Join Date: August 15, 2005
Location: Honolulu
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
IMO, those wheels help make the coupe in that picture Arin posted look better, but still... the GT ground effects make it look "heavy" or slab-sided or something - don't know the exact words to use, can't really describe it. Plus, the coupe I saw had the 2-tone GT paint job.
Nathan, I think Saleen did produce a few notches - supposed to be pretty rare though. Rather have a hatchback to go with that spoiler, for sure.
Nathan, I think Saleen did produce a few notches - supposed to be pretty rare though. Rather have a hatchback to go with that spoiler, for sure.
#27
Join Date: December 5, 2006
Location: Trapped in Minnesota
Posts: 31,620
Likes: 0
Received 70 Likes
on
66 Posts
Ya, I've heard of the Saleen coupes! pretty awesome!
I found a picture of a two-tone notch w/ gt body kit. I took a picture of it just so you could get the idea. sorry the picture sucks so bad. it's after 3am! It's from The Pocket Book of the Mustang by Peter Henshaw. It's on page 282!
I found a picture of a two-tone notch w/ gt body kit. I took a picture of it just so you could get the idea. sorry the picture sucks so bad. it's after 3am! It's from The Pocket Book of the Mustang by Peter Henshaw. It's on page 282!
#28
Needs to be more Astony
If i were going to do a conversion i'd do it with the cobra kit instead. cobra rear looks better since it has cut outs for exhaust.
#34
My C/T is cooler than Arin is.
Thread Starter
Join Date: August 6, 2004
Location: Parkersburg, WV
Posts: 4,596
Likes: 0
Received 4 Likes
on
4 Posts
anyone know if an aftermarket steering wheel can be put in my car... it has the airbag, would it be possible to remove the whole airbag system without messing with the car's electrical system?
#35
Look into Grant steering wheels.
Just unplug the Airbags wires (alot of racers start with 90-93 airbag model and just swap out the wheel.)
#36
#37
My C/T is cooler than Arin is.
Thread Starter
Join Date: August 6, 2004
Location: Parkersburg, WV
Posts: 4,596
Likes: 0
Received 4 Likes
on
4 Posts
dunno, must just be me, but I like it... is the scoop functional on his? I want to make mine functional, but wasn't sure if you could buy them like that or not...
#38
Scoop on hood is NOT functional.. none of them are besides the "mach1" ram air style.
That hood looks much worst on a Notch body style.
Only hood i would swap a stock one out for is a simple 2.5 cowl !!
That hood looks much worst on a Notch body style.
Only hood i would swap a stock one out for is a simple 2.5 cowl !!
#39
Summit Racing fox mustang build
There has been only 1 "notch" i seen that look ok with a body kit, and that was an old "summit racing built-up" you may remember.
Car was two tone silver on top and red on the lower half.
They added a '93 Cobra Rear bumper & Spoiler and side skirts "No GT text" just smooth.. Front is alittle to much for a Notch
Link
http://www.summitracing.com/tech/lin...index_box5.htm
Car was two tone silver on top and red on the lower half.
They added a '93 Cobra Rear bumper & Spoiler and side skirts "No GT text" just smooth.. Front is alittle to much for a Notch
Link
http://www.summitracing.com/tech/lin...index_box5.htm