Rally Pac
2/21/05, 04:30 PM
#1
V6 Member
Thread Starter
Join Date: February 18, 2005
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
I was wondering if anyone owns one of the reproduction Rally Pac pods from California Mustang. Since they are $30 vs. 400+ with the complete unit elsewhere I figured I could (hopefully) find the guages locally and save a bit of $$.
I ask because I am not sure on the guage size used and whether it is a problem to find guages to fit. I figure it would be a long shot to find a clock for it, but if I can save a few bucks for the unfinished car by going this route I would live.
I ask because I am not sure on the guage size used and whether it is a problem to find guages to fit. I figure it would be a long shot to find a clock for it, but if I can save a few bucks for the unfinished car by going this route I would live.
2/21/05, 06:31 PM
#2
Member
Join Date: October 6, 2004
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
2/21/05, 08:00 PM
#3
V6 Member
Thread Starter
Join Date: February 18, 2005
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
2/22/05, 09:00 AM
#4
Member
Join Date: September 2, 2004
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
That's only for the short wiring that plugs into the main harness under the dash and is routed through a metal channel attached to the steering column to the Rallye Pac itself, not the Rallye Pac housing, nor the column channel.
Thread
Thread Starter
Forum
Replies
Last Post