When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Steeda IRS subframe braces installed. Easy enough to do in my driveway with basic hand tools. Everything fit well except that the bolt holes in the driver side of my chassis were a little too far apart, or the slots on the front end of the brace were a little too close together. I widened the slots about a sixteenth inch with a drill and it was all good after that.
Steeda IRS subframe braces installed. Easy enough to do in my driveway with basic hand tools. Everything fit well except that the bolt holes in the driver side of my chassis were a little too far apart, or the slots on the front end of the brace were a little too close together. I widened the slots about a sixteenth inch with a drill and it was all good after that.
It’s always something isn’t it. Glad you got it together.
Just had to try these. The Royal Crimson was a bit of a pain to get right because it is a four stage color, (adhesion promoter, base color, pearl coloring and finally clear). Not for the faint of heart.
Just had to try these. The Royal Crimson was a bit of a pain to get right because it is a four stage color, (adhesion promoter, base color, pearl coloring and finally clear). Not for the faint of heart.
The "Match" looks right on. Nice job, must have been labor intensive. I assume they are just applied with 3M double sided tape? Last question where can I buy a set? Thanks, ED.
The "Match" looks right on. Nice job, must have been labor intensive. I assume they are just applied with 3M double sided tape? Last question where can I buy a set? Thanks, ED.
Ed, The only pain was fear, I had never mixed or sprayed a pearl color. Once I started I never turned back. Yes you are correct they are applied with 3M double sided tape. I used the same tape as bumper guides to mark the body lines in order to align the panels during install. and thirdly, I got mine from American muscle for under 80 dollars.
New leather inside, knee pads and A pillars. Easier than I expected, once I figured out how the pillar covers popped off.
New badge on the grill. The cheap tribar pony I got from Amazon didn't do well over the winter, so now I have a cheap US Air Force emblem from Amazon. We'll see if it lasts any better.
The colors and pattern go great with my paint and stripes. I'll probably replace the tribar on the trunk with the same badge.
I received my fender scoops from American Muscle yesterday. Got them at the sale price. My car is Oxford White so I think I'll paint the inserts silver on the outline areas only. This way it will give the inserts definition and should make them pop. I'll post pictures when completed.
I received my fender scoops from American Muscle yesterday. Got them at the sale price. My car is Oxford White so I think I'll paint the inserts silver on the outline areas only. This way it will give the inserts definition and should make them pop. I'll post pictures when completed.
I wanted to add a little color to what I think is a boring color on or PP1 GT's. It made them pop a lot more then I thought it would. They are painted copper. However behind the black wheels and R.C. body they look almost orange.
Yeah, kinda warm, but I served my time in the Persian Gulf, so it's not that bad here, right? That's what I tell myself when sweat is dripping into unmentionable places, anyway.
Moving on quickly from that thought, here are some pics.