Steeda EcoBoost Mustang CAI Install & Gains!
3/28/16 | 08:35 PM
#1
Thread Starter
Shelby GT350 Member
Joined: July 16, 2011
Posts: 2,040
Likes: 52
Steeda EcoBoost Mustang CAI Install & Gains!
Hello All:
Steve Turner just released an article on the new Steeda S550 EcoBoost CAI ... with very impressive gains:
Since there were internal combustion engines, there have been hot rodders trying to increase their output. Over the years, engines have gotten far more efficient and powerful, but numerous production restraints keep carmakers from fully maximizing the performance of their engines.
For example, the factory induction systems have gotten much better over the years. The sealed air boxes in modern Mustangs are fed fresh ambient air from behind the grille via well-designed ducts. However, the flow potential of a sealed box with a panel filter is limited.
These days there is a new Mustang player in town—the EcoBoost Mustang—and its 2.3-liter engine wears a turbo from the factory. Forced induction engines usually respond even better to breathing mods than their naturally aspirated counterparts. So, it’s only natural that the aftermarket with design freer flowing induction systems for these cars.
One of the latest systems is Steeda’s ProFlow Mustang Cold Air Intake for 2015 EcoBoost Mustang (PN 555-3199; $394.95). The company’s testing of the system with and without a performance calibration, definitely showed impressive gains. So, during one of our visits to the company’s South Florida digs we were able to document the installation of the system, so keep reading to see how the system goes on.
You can read more by searching Steeda EcoBoost Mustang Install!
http://www.steeda.com/steeda-proflow...oost-555-3199/
Best Regards,
TJ
Steve Turner just released an article on the new Steeda S550 EcoBoost CAI ... with very impressive gains:
By just adding the CAI, Steeda’s testing showed gains of 26.7 horsepower and 9.76 lb-ft of torque and there are larger more consistent gains to be had with the companion SCT calibration. With the tune in the PCM the car picked up another 21.07 horsepower and 68.23 lb-ft of torque.
For example, the factory induction systems have gotten much better over the years. The sealed air boxes in modern Mustangs are fed fresh ambient air from behind the grille via well-designed ducts. However, the flow potential of a sealed box with a panel filter is limited.
These days there is a new Mustang player in town—the EcoBoost Mustang—and its 2.3-liter engine wears a turbo from the factory. Forced induction engines usually respond even better to breathing mods than their naturally aspirated counterparts. So, it’s only natural that the aftermarket with design freer flowing induction systems for these cars.
One of the latest systems is Steeda’s ProFlow Mustang Cold Air Intake for 2015 EcoBoost Mustang (PN 555-3199; $394.95). The company’s testing of the system with and without a performance calibration, definitely showed impressive gains. So, during one of our visits to the company’s South Florida digs we were able to document the installation of the system, so keep reading to see how the system goes on.
You can read more by searching Steeda EcoBoost Mustang Install!
http://www.steeda.com/steeda-proflow...oost-555-3199/
Best Regards,
TJ
Last edited by tj@steeda; 3/28/16 at 08:37 PM.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
1/22/16 04:41 PM