I was wondering if a 10 inch wheel up front would fit? I plan on going forgestar F14's with a 285 35 ZR19 michelin pilot super sports. Will that fit without rubbing up front. Right now I am at stock ride height but eventually plan on lowering it 1 inch.

 

I run a Forgestar CF5's in a 19X9.5 all the way around with 285/35/19's. I know there are guys running 10" wide rims up front, just need the right offset.

 

What would be the right offset?

 

What would be the right offset

 

Not sure about 19's, but I run Forgestar CF5's in 18 X 11 up front with 305's. You need to run some negative camber for the tire to clear though. Not sure about backspacing either as I had purchased these thru Vorshlag.

 

Call Weld wheel. They are very helpful with those questions.

 

I plan on upgrading the wheels and tires on my 13' mustang gt with track pack and I was wondering if a 10 inch wide wheel would fit up front (19 inch tall)? I would put 285 35 19 michelin pilot super sport tires. It is lowered 1 inch with steeda springs. The wheels would be forgestar F14's. Would there be any rubbing? The offset it +42mm

 

My 18x10's are 43 offset up front (285 section tire). I believe Forgstar also sells a 19x10 w/43 offset. 285's should be fine with front strut type suspension but keep in mind tire choice as well. For example, a BFG Rival 285 runs WIDE (they look like 305 section tires!), so that should also play into your consideration. Running coilovers up front would give you a bit more wiggle-room.