Originally Posted by smbstyle
(Post 6097702)
PLEASE post up pics of those wheels on the KB when you get them on! I've been dying to see what that combo will look like (non-photoshop pic).
|
I dont want to see a gt, I want my boss 302 LS built June 8th, due the 4th. I can't go to fallon this weekend without it but when I do go I will let you know. I would like to see both cars together.
|
love this thread.
|
Originally Posted by Bossdog
(Post 6098940)
I was thinking the exact same thing on the Chamferng suggestion.
For paint I just used what I had on the shelf, Krylon Flat black. I sprayed it in a Snapple Cap and used a Q-Tip. It worked really well |
Originally Posted by 06GT
(Post 6098896)
Hey Gary, are you gonna put an LS front splitter on your car to balance out the rear spoiler?
|
My buddy puts some 2x6 step-block "ramps" behind the rear tires of his F250 then backs up onto them to get some more downward angle on is trailer to drop off his race car...food for thought!
|
Originally Posted by cloud9
(Post 6099162)
I'm thinking about it at some point. The first obstacle is figuring out whether I can get some Race Ramps that would allow me to load/unload on my tilt bed trailer. Even with the standard Boss splitter I drag it for a few inches on the diamond plate so I know it won't go with the LS splitter. Otherwise, I'm up against getting a new enclosed trailer with a very low bed and fold out ramps. That's not as big of a deal as the fact that then I'd need a 3/4 or 1 ton pickup to pull it. I'm pretty much maxed out with my F-150 on the current setup.
http://www.raceramps.com/trailer-ram...xtra-long.aspx If that isn't a low enough angle, they have extenders which will make it an extremely low angle. |
"What have you done to/with your Boss 302 this week?"
Bought another one. Working out the details of the deal on #LS264 right now. |
I've been thinking about a second Boss as well. Sadly thinking is as far as I can go...
|
Originally Posted by Dig-It Racing
(Post 6099296)
"What have you done to/with your Boss 302 this week?"
Bought another one. Working out the details of the deal on #LS264 right now. Congrats! Hope it works it out for you :) |
Originally Posted by cloud9
(Post 6099162)
I'm thinking about it at some point. The first obstacle is figuring out whether I can get some Race Ramps that would allow me to load/unload on my tilt bed trailer. Even with the standard Boss splitter I drag it for a few inches on the diamond plate so I know it won't go with the LS splitter. Otherwise, I'm up against getting a new enclosed trailer with a very low bed and fold out ramps. That's not as big of a deal as the fact that then I'd need a 3/4 or 1 ton pickup to pull it. I'm pretty much maxed out with my F-150 on the current setup.
http://kwikload.com/index.htm There are several different brands but this link has a video do you can see how it works. |
Originally Posted by Dean#4AI
(Post 6099401)
I know this is an expensive solution but you mentioned getting an enclosed trailer. How about a rollback trailer? I've seen them in action and they just might work. I'm hoping to find someone local that has one so I can see if I can load the LS without taking off the front splitter.
http://kwikload.com/index.htm There are several different brands but this link has a video do you can see how it works. |
Originally Posted by Dig-It Racing
(Post 6099296)
"What have you done to/with your Boss 302 this week?"
Bought another one. Working out the details of the deal on #LS264 right now. Good luck on closing the deal!! |
Originally Posted by Dig-It Racing
(Post 6099296)
"What have you done to/with your Boss 302 this week?"
Bought another one. Working out the details of the deal on #LS264 right now. |
Originally Posted by 1FAFP90
(Post 6098760)
I'm not planning anything as exciting as you guys, but once my joints cooperate, I'll be using this:
http://i266.photobucket.com/albums/i...amps6557CR.jpg The center section is removable to allow for easier access. I need to make sure I put it back in position before driving off! The wheel chock block is removable to allow placing the sloping ramps in front to drive off forwards, if necessary. http://i266.photobucket.com/albums/i...amps6560CR.jpg https://lh3.googleusercontent.com/-X.../ATT00015_.jpg |
Originally Posted by LQQK
(Post 6099605)
|
also looks like he is welding near the gas tank...LOLLLLLL
|
Originally Posted by 06GT
(Post 6099737)
also looks like he is welding near the gas tank...LOLLLLLL
|
Originally Posted by 1FAFP90
(Post 6099911)
Not for long ... lol
|
Raptor and K&N
3 Attachment(s)
Originally Posted by LQQK
(Post 6098990)
Pics?
|
All times are GMT -6. The time now is 07:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands