Sound Enhancement Pipe - Delete
Mach 1 Member
Joined: January 6, 2011
Posts: 872
Likes: 3
From: Phoenix, Az
Just did this to mine using some parts leftover from the 95 car. Surprising how much crap you pull out of the car with this mod. Nice now that I can clean up a bit easier under the master cylinder reservoir.
Cobra R Member
Joined: December 3, 2010
Posts: 1,851
Likes: 3
Took me 30 seconds to remove the old tube, two seconds to pop in the firewall plug and how fast you can tighten a clamp for the rest. For the guys that do not do their own work, don't worry you can do it your self with a 10 MM socket and screwdriver.
For the sound, not too much different. In a way I like it since you can hear the motor better for real - not the way it sounds in a tube, if that makes sense. I can also hear the exhaust note a little better (7/8 discs). It is not a grand difference but the whole point is cleaning up the engine compartment anyway.
Old pipe and pipe out
Connection points bare and with Kendall's kit installed. The last is a newer clean look
Last edited by 2012YellowBoss; Nov 22, 2011 at 04:02 PM.
Thread Starter
Bullitt Member
Joined: April 21, 2011
Posts: 482
Likes: 0
From: Santa Clarita, CA
Yeah, Scott.... thanks for the pics! Remember, the kit also includes a rubber grommet that can be used in the future instead of the plug. This is an ideal place to pass any wires from the interior to the exterior of the car - in which case the plug can be discarded in favor of the grommet!
Bullitt Member
Joined: February 2, 2011
Posts: 443
Likes: 7
From: FAR ROCKAWAY, NY
Got my kit fast, thanks
Took me 30 seconds to remove the old tube, two seconds to pop in the firewall plug and how fast you can tighten a clamp for the rest. For the guys that do not do their own work, don't worry you can do it your self with a 10 MM socket and screwdriver.
For the sound, not too much different. In a way I like it since you can hear the motor better for real - not the way it sounds in a tube, if that makes sense. I can also hear the exhaust note a little better (7/8 discs). It is not a grand difference but the whole point is cleaning up the engine compartment anyway.
Old pipe and pipe out
Connection points bare and with Kendall's kit installed. The last is a newer clean look
Took me 30 seconds to remove the old tube, two seconds to pop in the firewall plug and how fast you can tighten a clamp for the rest. For the guys that do not do their own work, don't worry you can do it your self with a 10 MM socket and screwdriver.
For the sound, not too much different. In a way I like it since you can hear the motor better for real - not the way it sounds in a tube, if that makes sense. I can also hear the exhaust note a little better (7/8 discs). It is not a grand difference but the whole point is cleaning up the engine compartment anyway.
Old pipe and pipe out
Connection points bare and with Kendall's kit installed. The last is a newer clean look
Bullitt Member
Joined: February 12, 2011
Posts: 364
Likes: 0
From: Knoxville, TN
Cobra Member
Joined: April 14, 2011
Posts: 1,072
Likes: 25
From: NJ. Waiting for our Gov. to be held accountable for his actions>>>Jersey Broke
I'M DOING THE SAME IN USING THE EXISTING CLAMP. IT LOOKS MORE FACTORY / CLEANER THAN A HOSE CLAMP.
