What technique did you use to remove the excess?
I removed the extra material near the air inlet but didn't like how it looked so I didn't go any further

 

Used a Dremel (sp?) tool. Never found a use for one before and had to borrow it from a friend since I do not have my own but it worked well on plastic. I bought a tiny metal cutter for his tool, only real problem was the plastic would melt together as you cut, like what happened when I made the splitter.

The tool is straight and it was difficult to make some cuts around the tabs that were sticking up along the edges. Also around the fake lights there are spots with little room to work but as I said just a little extra time in those areas and it will look OK. I cut from the side not the inner part of the fake lights and bars, like the can openers you see on TV that open the cans from the side with no sharp edges (hope that make sense).

I guess I should have taken some pics, sorry bout that , however they would have made the process look worse then it was. When I got done I spend time with little files making all the lines straight and the corners sharp.

The NQ paint is three stage and a little hard to match so I will put the original away for now. I just sprayed it with a spray bomb, not perfect in fact the paint is the weak point of the job but it is just a track grille afterall

 

Speaking of track grilles, here's a couple laps from my weekend:

 

Hmmm, you didn't make me one?

 

Should have asked before, I am always willing to practice on someone else's Boss

 

Especially going on the track
"Oops, sorry. Did I do that?" :-)

 

Are you offering a car to test on the track, i will make 2012yellowboss ride shotgun instead!

 

Going to the track for my 2nd outing this Sunday. Probably let the instructor drive it. That will be the first person besides me (and the salesman) behind the wheel

 

Here is a side by side video from my last track weekend. I am on the right side. This is on the stock P-Zeros for both runs.

 

Link did not work for me, said it contained a malformed video id. Anyone else have that problem?

 

Same no vid same error

 

Try again now

 

Cool video. Going to the track Sunday and having the instructor drive my car. I'll try to do some comparison videos. I am pretty sure I will not stsy as close as ypu did.

 

Cool, a nice improvement and hot on time of the pro!

 

Since this pic thread needs more pics, I'll post the pic my dealer emailed me this morning.

It's my BOSS waiting on the showroom floor for my return from overseas.

I won't be able to pick it up until December. Not sure I'll last that long.

The way the car looks ("DRIVE ME DAMMIT"), I'm afraid it might drive itself out of there and start having fun without me.

 

Beautiful car!

 

Here are some pics of the new Boss.......Hauler

 

Nice setup. They don't offer the F-150 in CO?

 

Wouldn't match the trailer Actually I would have gone for the orange/black Raptor if it could pull 11,000 lbs I had this baby up to 75 mph by the end of the onramp pulling the trailer with the twin turbos baby!

 

Nice! Have heard nothing but good things about that motor.