Shifter knob
#1
Cobra Member
Thread Starter
Shifter ****
Can anyone recommend a ball shifter **** that goes right on the stock 2012 shifter, that isn’t too outrageous in price? Looking for either black or chrome.
#2
GTR Member
What do you consider outrageous?
This place, http://www.epcoshiftknobs.com/ has the least expensive ***** but they don't sell the boot adapter you need.
You can get a Boss black **** setup for about $75, a Hurst **** for about $50, then there is Grabber Pony, they sell the **** and adapter, or you can go to here, http://www.americanmuscle.com/2010-m...ift-*****.html
Lots of choices out there.
This place, http://www.epcoshiftknobs.com/ has the least expensive ***** but they don't sell the boot adapter you need.
You can get a Boss black **** setup for about $75, a Hurst **** for about $50, then there is Grabber Pony, they sell the **** and adapter, or you can go to here, http://www.americanmuscle.com/2010-m...ift-*****.html
Lots of choices out there.
#4
Shelby GT350 Member
I picked up my black roush **** and shift boot from Stage3 for $75.
Watch out just buying a ****, sometimes it may not fit right with your shift boot or require a retainer with it.
Watch out just buying a ****, sometimes it may not fit right with your shift boot or require a retainer with it.
#8
You can get OEM Boss shift knows for $50 here:
http://www.partscheap.com/Mustang-Bo...3z-7213-aa.htm
http://www.partscheap.com/Mustang-Bo...3z-7213-aa.htm
#11
Shelby GT350 Member
http://www.ebay.com/itm/Roush-Shift-...-/110817086137
This is the 2nd time I've seen this listed. Might be able to scoop it up cheap if no one else bids.
This is the 2nd time I've seen this listed. Might be able to scoop it up cheap if no one else bids.
#15
Shelby GT350 Member
Originally Posted by 2012GTCS
is it possible to not use the new shift boot? would rather just a screw off screw on install as opposed to popping off the panels lol lazy
#16
Cobra Member
Thread Starter
Yeah, I was hoping for something to just replace the current **** without having to lift up the console or replace the boot ( I have the cheaper standard plastic ****)…..I am paranoid that it would never go back together as good as from the factory or I would snap off something that would then need to be replaced….
#17
Cobra Member
Join Date: December 7, 2010
Location: Panama City, Fl.
Posts: 1,124
Likes: 0
Received 6 Likes
on
5 Posts
I just talked with Nancy at EPCO. They have the two adapters to replace the stock leather **** now, large base and also the small base for others. Priced at $16.95 it is a deal. They both appear to be brushed and are threaded like others on the market. They are not on the web site as of today but they are scheduled for an update.
This is what I am ordering with the wide based adapter....
This is what I am ordering with the wide based adapter....
#18
Cobra R Member
Join Date: June 24, 2011
Location: Long Island
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
So there's different boots on different cars?! I have a GTCS so I assume the cheaper boot.
Am I the only one who thinks the factory black/gray **** is nice?! Lol
Am I the only one who thinks the factory black/gray **** is nice?! Lol
#19
Cobra Member
Join Date: December 7, 2010
Location: Panama City, Fl.
Posts: 1,124
Likes: 0
Received 6 Likes
on
5 Posts
Some have an aluminum **** with a different boot. Not so much cheap...but different.
The **** you have is used in several cars with a different shift pattern.......I have looked at many and finally settled on this one with my military background reflected in it. Plus, no one will find reverse now for sure...lol.
The **** you have is used in several cars with a different shift pattern.......I have looked at many and finally settled on this one with my military background reflected in it. Plus, no one will find reverse now for sure...lol.
#20
Originally Posted by AzPete
Some have an aluminum **** with a different boot. Not so much cheap...but different.
The **** you have is used in several cars with a different shift pattern.......I have looked at many and finally settled on this one with my military background reflected in it. Plus, no one will find reverse now for sure...lol.
The **** you have is used in several cars with a different shift pattern.......I have looked at many and finally settled on this one with my military background reflected in it. Plus, no one will find reverse now for sure...lol.