Lights Question
#1
Thread Starter
Lights Question
I have the 2011 GT CS and want to change my grill to have the in board lights like my 2006, but is the harness there for the stock lights in the grill or is it deleted due to the lights being in the bumper cover on the GT CS cars?
#2
Mach 1 Member
Join Date: April 22, 2010
Location: NoVA
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
Some people that have GTs have swapped out their grill for one w/o the fog lights and also installed the GT/CS lower valance that have the fogs in the valance (like yours). Part of the kit is a set of wires that plug into the connection of the old fogs and is long enough to hook up the new fogs on the GT/CS valance.
So either the GT/CS already has these pigtails installed and you can just disconnect them, or if the OEM wiring is run different on the GT/CS, then you can use the same pigtail to power the GT type grill fogs.
So either the GT/CS already has these pigtails installed and you can just disconnect them, or if the OEM wiring is run different on the GT/CS, then you can use the same pigtail to power the GT type grill fogs.
#3
Thread Starter
Thanks is there any way to run all 3 sets?
Thread
Thread Starter
Forum
Replies
Last Post
Centurion96
05-09 Exterior Modifications
11
5/28/20 03:57 PM