Ford part number help
#1
Mach 1 Member
Thread Starter
Join Date: March 27, 2014
Location: Winnipeg, MB
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
Ford part number help
I need a little help with the Ford part number for the 2013 Boss rear valance, and without a Boss VIN the local dealers aren't much help. I've narrowed it down to 2 numbers, one of which is the GT500 dual tip valance, the other is the 2013 Boss one. If somebody with the Boss one could confirm it, or somebody with the GT500 one could rule it out, it would be a huge help.
Rear Valance DR3Z-17F828 with either -AA or -BA on the end.
I know there's a Ford Racing kit number for it, but I want to see if its cheaper to buy the OE part number...as I've now found a few cases where that's how it is.
Rear Valance DR3Z-17F828 with either -AA or -BA on the end.
I know there's a Ford Racing kit number for it, but I want to see if its cheaper to buy the OE part number...as I've now found a few cases where that's how it is.
#3
So I just did a quick internet search on that part number, DR3Z-17F828-BA, and found a link to this:
http://www.stangmods.com/2013-Boss-3...nce-p/3584.htm
Is that the one you're looking for?
http://www.stangmods.com/2013-Boss-3...nce-p/3584.htm
Is that the one you're looking for?
#4
Mach 1 Member
Thread Starter
Join Date: March 27, 2014
Location: Winnipeg, MB
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
So I just did a quick internet search on that part number, DR3Z-17F828-BA, and found a link to this:
http://www.stangmods.com/2013-Boss-3...nce-p/3584.htm
Is that the one you're looking for?
http://www.stangmods.com/2013-Boss-3...nce-p/3584.htm
Is that the one you're looking for?
Thanks for all your help guys. Just needed some affirmation that I was looking at the right stuff.
#5
Bullitt Member
I can confirm you have the right numbers now.
I actually ordered the wrong part when I mixed up the AB and the BA in the part number when I needed a quad exhaust rear valance.
I actually ordered the wrong part when I mixed up the AB and the BA in the part number when I needed a quad exhaust rear valance.
#6
Mach 1 Member
Thread Starter
Join Date: March 27, 2014
Location: Winnipeg, MB
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
How'd you find the cutting? I'm good under the car. But scissors and crayons were always a challenge for me. Body saw? Nervous.
#7
Bullitt Member
the line is actually already on the original bumper. If you use a gold, silver or white marker, on that line, it really stands out. Just take your time and it it is a piece of cake.
#8
Here is every part you will need. The Diva Danielle posted them a while ago. Hey why did she get banned?
https://themustangsource.com/forums/...-2013s-512346/
https://themustangsource.com/forums/...-2013s-512346/
#9
Mach 1 Member
Thread Starter
Join Date: March 27, 2014
Location: Winnipeg, MB
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
Here is every part you will need. The Diva Danielle posted them a while ago. Hey why did she get banned?
https://themustangsource.com/forums/...-2013s-512346/
https://themustangsource.com/forums/...-2013s-512346/
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
7/30/15 06:47 AM