Finally dyno results
#1
Bullitt Member
Thread Starter
Join Date: May 2, 2010
Location: Los Angeles,CA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Finally dyno results
I had my car dynoed today and I was happy with the results
406rwhp/386rwtq temp was around 88 degrees and the altitude 1174 ft
I never baselined my car stock so not sure of the total gains vs stock but from what I've seen my mods did a decent job increasing both hp and Tq
I'm really liking this combo and the BlowByRacing tune is spot on. A/F was around 12:4
I have 3.73 gear and 6speed manual and all pulls were done in 5th gear
406rwhp/386rwtq temp was around 88 degrees and the altitude 1174 ft
I never baselined my car stock so not sure of the total gains vs stock but from what I've seen my mods did a decent job increasing both hp and Tq
I'm really liking this combo and the BlowByRacing tune is spot on. A/F was around 12:4
I have 3.73 gear and 6speed manual and all pulls were done in 5th gear
#2
GTR Member
Wait a minute, are you not the one who posted this just a few days ago?
let me clear a few things up for ya.I dont care about numbers period at this level of mods.I'm not spending money on dyno pulls to find out I've gained 3 or4 hp from one tune to the next.
I like the idea of having a couple different tunes I can run.If I supercharged or put a turbo on my car I would want to dyno for sure.
what is this obsession with numbers on a car with bolt on's? I realize there are people who would like to see numbers to help them decide on a combo/tune from a certain shop and thats cool.
I like the idea of having a couple different tunes I can run.If I supercharged or put a turbo on my car I would want to dyno for sure.
what is this obsession with numbers on a car with bolt on's? I realize there are people who would like to see numbers to help them decide on a combo/tune from a certain shop and thats cool.
#5
Bullitt Member
Thread Starter
Join Date: May 2, 2010
Location: Los Angeles,CA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
and I still dont care about numbers at this level this was done for the masses just took advantage of a cool offer to dyno my car.these cars respond well to exhaust/intake mods and the tune just ties it all togeather.
#6
Bullitt Member
Thread Starter
Join Date: May 2, 2010
Location: Los Angeles,CA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
#9
GT Member
Join Date: July 21, 2010
Location: Southaven, MS (near Memphis, TN)
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
I wouldn't call 88 degrees hot weather It's better than the high 90s/low 100s its been recently..hah
Maybe an offroad version would gain a few more hp without the cats? I hope so, because I just ordered it..hah
Maybe an offroad version would gain a few more hp without the cats? I hope so, because I just ordered it..hah
#10
Mach 1 Member
Join Date: January 5, 2010
Location: AutoClubSpeedway
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
I'm so jealous, I've been dealing with
Gtr for 5 years and haven't made it
to one of their events...working weekends
sucks.
Wife gave me greenlight for a blower,
we'll see what happens but I'd hate
to throw my fuel economy down the
drain...
#12
Bullitt Member
Thread Starter
Join Date: May 2, 2010
Location: Los Angeles,CA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
I decided not to do either one because of the hassle if you get caught.I bet your car will make some good power with your off road X and the sound will be sick
#13
GT Member
Join Date: July 21, 2010
Location: Southaven, MS (near Memphis, TN)
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Oh didn't notice you were in CA.
Here in Mississippi they don't care about the offroad exhaust as long as you bring along a hot cousin.
#14
Member
Join Date: July 31, 2010
Location: Southaven, MS
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Wow, never thought I'd see someone from this town on here, lol. Where'd u get your car from? I ordered mine thru Homer Skelton and supposed to be here in "about" 2 weeks.
#16
Bullitt Member
Thread Starter
Join Date: May 2, 2010
Location: Los Angeles,CA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
yes Ford did a great job with this motor.It really shines in the upper rpm range 5-6K
I remember my old 5.0 even with heads,cam,intake would start signing off at about 5500rpm.
I've got 4000 miles on my car and I can tell It's breaking in nicely.
http://www.youtube.com/watch?v=EV-Gw...ayer_embedded#!
I remember my old 5.0 even with heads,cam,intake would start signing off at about 5500rpm.
I've got 4000 miles on my car and I can tell It's breaking in nicely.
http://www.youtube.com/watch?v=EV-Gw...ayer_embedded#!
#17
Mach 1 Member
Join Date: January 5, 2010
Location: AutoClubSpeedway
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
yes Ford did a great job with this motor.It really shines in the upper rpm range 5-6K
I remember my old 5.0 even with heads,cam,intake would start signing off at about 5500rpm.
I've got 4000 miles on my car and I can tell It's breaking in nicely.
http://www.youtube.com/watch?v=EV-Gw...ayer_embedded#!
I remember my old 5.0 even with heads,cam,intake would start signing off at about 5500rpm.
I've got 4000 miles on my car and I can tell It's breaking in nicely.
http://www.youtube.com/watch?v=EV-Gw...ayer_embedded#!
#18
#19
Bullitt Member
Thread Starter
Join Date: May 2, 2010
Location: Los Angeles,CA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
#20
MOTM Committee Member