Notices
5.0L GT Modifications Placeholder for future motor based GT's modifications.

~ Exhaust Video! GT500 AxleBack, JBA H-Pipe, No Resonators

Thread Tools
 
Search this Thread
 
Old 3/4/12, 11:35 AM
  #1  
Mach 1 Member
Thread Starter
 
Nocturnal'14's Avatar
 
Join Date: September 20, 2011
Location: KY/OH/MO
Posts: 990
Likes: 0
Received 0 Likes on 0 Posts
~ Exhaust Video! GT500 AxleBack, JBA H-Pipe, No Resonators

Well I am going to have my JBA 3"/3" H-Pipe installed tomorrow, so I wanted to get a "Before" video of the GT500's by themselves for comparison.

BEFORE....
GT500 axle Back STOCK everything else:


AFTER......
GT500 axle Back, JBA 3" in/out H-pipe w/ NO resonators:

I will update this thread on Tuesday (Hopefully) once I get the h-pipe installed!

Here is a pic of the h-pipe itself:


Last edited by Nocturnal'14; 3/7/12 at 11:02 AM.
Old 3/4/12, 04:56 PM
  #2  
Cobra R Member
 
2012GTCS's Avatar
 
Join Date: June 24, 2011
Location: Long Island
Posts: 1,568
Likes: 0
Received 0 Likes on 0 Posts
Sounds good so far, can't wait to hear it after!!
Old 3/4/12, 06:23 PM
  #3  
Member
 
32Fountain's Avatar
 
Join Date: January 13, 2011
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 2012GTCS
Sounds good so far, can't wait to hear it after!!

DITTO FOR ME! I have the GT 500's now and I am contemplating removing the reasonators.
Old 3/6/12, 08:23 AM
  #4  
Mach 1 Member
Thread Starter
 
Nocturnal'14's Avatar
 
Join Date: September 20, 2011
Location: KY/OH/MO
Posts: 990
Likes: 0
Received 0 Likes on 0 Posts
Got the H-Pipe installed....Resonators are not cut out yet (My exhaust guy has been busy)
The install was really easy! Took less than an hour start to finish, hardest part was getting those 1/2" bolts off the front pieces of the stock h-pipe! (HINT: Loosen them with a wrench then use a set of vice grips on the end of the bolt to turn it off) BE SURE you seat the front ball connectors well, I had an exhaust leak out of the DS one and had to re-adjust it!

I wish I would have weight the two now....didn't think about it at install. But I can say that the JBA piece IS lighter!

Slid the over axle pipes into the H-Pipe and was not able to clamp them down since the h-pipe is 3" and the over axle pipes are 2.75".

Started the car up....MAN oh MAN does it sound good, of course I tried feeling for any exhaust air out the back of the car and there was not any (it's all coming out of the h-pipe right now. I had a slight thought that this would sound pretty nice without mufflers at all.....hope I will not be disappointed with the h-pipe welded up to the axle back.

NOTE: I did NOT jack up the car at the pumpkin....the jack is just there as an added safety measure!




Last edited by Nocturnal'14; 3/7/12 at 11:07 AM.
Old 3/7/12, 11:01 AM
  #5  
Mach 1 Member
Thread Starter
 
Nocturnal'14's Avatar
 
Join Date: September 20, 2011
Location: KY/OH/MO
Posts: 990
Likes: 0
Received 0 Likes on 0 Posts
Well It's all in and done!
The exhaust shop did an outstanding job and only charged me $60 for removing the resonators and add in the 3" pip in their place. I had them bring the axle back about an inch further to the rear so the tips would line up better with the rear valance.

Car sounds awesome and is exactly what I was going for; Louder yet deeper tone!
Inside the car it has a rumble but NO drone at all!

Video added to first post.

Last edited by Nocturnal'14; 3/7/12 at 11:03 AM.
Old 3/7/12, 11:38 AM
  #6  
Bullitt Member
 
Mikey's Avatar
 
Join Date: December 23, 2011
Location: Indianapolis, IN
Posts: 384
Likes: 0
Received 0 Likes on 0 Posts
Are you running stock headers and cats?
Old 3/7/12, 12:15 PM
  #7  
Cobra Member
 
AzPete's Avatar
 
Join Date: December 7, 2010
Location: Panama City, Fl.
Posts: 1,124
Likes: 0
Received 6 Likes on 5 Posts
I have the GT500 w/no resonators.....hard to tell the difference in yours with the aftermarket H pipe. In fact, when I played the video, the wife asked when I recorded our car.....
Old 3/7/12, 04:31 PM
  #8  
Bullitt Member
 
Scuba-Matt's Avatar
 
Join Date: January 2, 2012
Location: S.E. Florida
Posts: 367
Likes: 0
Received 1 Like on 1 Post
Sounds the same to me.
Old 3/7/12, 09:27 PM
  #9  
Member
 
thezfunk's Avatar
 
Join Date: June 22, 2010
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
You are doing exactly what I was going to do...exactly. I just am still on the fence about the sound. I just don't know if there are any exhaust pieces that will make the car sound like I want in my head. I know part of it is the crappy audio you get with almost every exhaust video. I don't need HD video for an exhaust video I need HD SOUND! I know there was a thread around on one of the forums talking about the firing order of the 5.0 and how, to some people, it will never sound like they want.

Thanks for the time and effort though. It is appreciated.
Old 3/7/12, 10:52 PM
  #10  
Mach 1 Member
Thread Starter
 
Nocturnal'14's Avatar
 
Join Date: September 20, 2011
Location: KY/OH/MO
Posts: 990
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Mikey
Are you running stock headers and cats?
Yes...
Originally Posted by Scuba-Matt
Sounds the same to me.
There is a difference in the sound....if you listen close enough on the video you can hear it, in person it is definitely noticeable!!!!
This is the exact sound I was going for and I am very happy with the purchase/work put in to make this happen.
Old 3/8/12, 05:33 AM
  #11  
Member
 
Scober's Avatar
 
Join Date: February 11, 2012
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Sounds great! Did the JBA H decrease or eliminate the popping/crackling on decel the GT500's produce?
Old 3/8/12, 09:07 AM
  #12  
Mach 1 Member
Thread Starter
 
Nocturnal'14's Avatar
 
Join Date: September 20, 2011
Location: KY/OH/MO
Posts: 990
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Scober
Sounds great! Did the JBA H decrease or eliminate the popping/crackling on decel the GT500's produce?
It's more of a gurgle now...not a cracking. Kinda like what the cherry bombs used to sound like back in the day.
Old 3/8/12, 06:51 PM
  #13  
Bullitt Member
 
Bmeline916's Avatar
 
Join Date: June 25, 2011
Location: Raceland , la
Posts: 497
Likes: 0
Received 0 Likes on 0 Posts
It does sound slightly throatier, deep, and a bit louder to me. Nice job.
Old 3/8/12, 08:35 PM
  #14  
Member
 
32Fountain's Avatar
 
Join Date: January 13, 2011
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Uin2it
Well It's all in and done!
The exhaust shop did an outstanding job and only charged me $60 for removing the resonators and add in the 3" pip in their place. I had them bring the axle back about an inch further to the rear so the tips would line up better with the rear valance.

Car sounds awesome and is exactly what I was going for; Louder yet deeper tone!
Inside the car it has a rumble but NO drone at all!

Video added to first post.
Thanks for sharing. Sounds good to me.
Old 3/9/12, 11:17 AM
  #15  
Mach 1 Member
Thread Starter
 
Nocturnal'14's Avatar
 
Join Date: September 20, 2011
Location: KY/OH/MO
Posts: 990
Likes: 0
Received 0 Likes on 0 Posts
Weighed the Resonators today....6lbs each 12lbs total!
Old 3/10/12, 07:55 PM
  #16  
Mach 1 Member
 
RobDis's Avatar
 
Join Date: January 25, 2011
Location: Ville Platte, Louisiana
Posts: 1,075
Likes: 0
Received 1 Like on 1 Post
I did the Heartthrob H-Pipe kit and to me it didn't make any difference in my sound. If anything I felt like it got quieter. My exhaust guy said it probably did due to less restriction (3 inch pipe all the way back to the mufflers). But later on when I get my intake and tune my exhaust will be able to breathe better and I will likely see the difference it really makes there. At least that's what I've been told.

Your car does sound excellent and the video captures the sound of the GT500's very well!
Old 5/28/13, 09:47 PM
  #17  
Banned
 
TheDivaDanielle's Avatar
 
Join Date: July 4, 2012
Location: Washington, DC
Posts: 2,983
Likes: 0
Received 0 Likes on 0 Posts
just bringing this to the top, since it's the thread that set the direction of my mods approximately a year ago.
Old 5/29/13, 12:03 PM
  #18  
Mach 1 Member
Thread Starter
 
Nocturnal'14's Avatar
 
Join Date: September 20, 2011
Location: KY/OH/MO
Posts: 990
Likes: 0
Received 0 Likes on 0 Posts
Then as the OP let me add that I have since REMOVED the JBA H-Pipe due to fitment issues.

I am still running the GT500 AB though, stock pipe H-Pipe and stock over axle pipes without resonators ......sounds AWESOME!
Old 5/29/13, 12:05 PM
  #19  
Shelby GT350 Member
 
RedCandy5.0's Avatar
 
Join Date: June 9, 2008
Location: Rochester NY
Posts: 2,061
Likes: 0
Received 1 Like on 1 Post
Originally Posted by StangLife'12
Then as the OP let me add that I have since REMOVED the JBA H-Pipe due to fitment issues.

I am still running the GT500 AB though, stock pipe H-Pipe and stock over axle pipes without resonators ......sounds AWESOME!
You running your cats still?
Old 5/29/13, 12:08 PM
  #20  
Shelby GT350 Member
 
dmichaels's Avatar
 
Join Date: April 14, 2013
Location: CT
Posts: 2,460
Received 111 Likes on 101 Posts
Originally Posted by StangLife'12
Then as the OP let me add that I have since REMOVED the JBA H-Pipe due to fitment issues.

I am still running the GT500 AB though, stock pipe H-Pipe and stock over axle pipes without resonators ......sounds AWESOME!
Wish I could access the video here at work. This is the setup I'm looking at.


Quick Reply: ~ Exhaust Video! GT500 AxleBack, JBA H-Pipe, No Resonators



All times are GMT -6. The time now is 12:32 AM.