My 2010 Sterling Grey GT Coupe
#61
V6 Member
Join Date: September 4, 2011
Location: Minnesota
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
The GT/CS wheels are argent colored (dark met. grey).
Last edited by 12MCAV6PP; 1/29/12 at 12:03 PM.
#62
V6 Member
Join Date: September 4, 2011
Location: Minnesota
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
(Got my winter tires on now, need those up here in Minnesota)
#63
Legacy TMS Member
Thread Starter
#65
Legacy TMS Member
Thread Starter
Got the hood stripe on...the shape is a little different than the stock one but it's close enough.
Last edited by Tony Alonso; 2/3/12 at 02:50 PM.
#67
V6 Member
Join Date: September 4, 2011
Location: Minnesota
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Love the Boss hood decal. I want to do the same to my car.
I appologize if you mentioned this before, I did a quick scan
of this thread and didn't see anything, where did you get the
hood decal from?
I appologize if you mentioned this before, I did a quick scan
of this thread and didn't see anything, where did you get the
hood decal from?
#68
Currently a Corvette Owner!
Tony - how are those all-season Pirelli's working out for you?
Mike - I see a GT500 rear wing, nice! Details? Where/price/install? Mine is on order, 3dCarbon, pre-painted from CJPony. Can't wait to get put it on when it gets here!
Mike - I see a GT500 rear wing, nice! Details? Where/price/install? Mine is on order, 3dCarbon, pre-painted from CJPony. Can't wait to get put it on when it gets here!
#69
Legacy TMS Member
Thread Starter
The more I looked at it this evening, the less I liked it. And after the $95 I spent for their version, along with a $75 installation charge, I've written them back to see if they can redo this.
I've seen a few threads out there for the one from Ford that costs over $300. I like the ProMotorStripes version, and I did like dealing with the company. They actually sent me another decal at no charge, even though technically it was not their responsibility for the failed attempt.
Hopefully this helps.
#70
Legacy TMS Member
Thread Starter
#71
V6 Member
Join Date: September 4, 2011
Location: Minnesota
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
I've been watching the Promotorsports one on ebay just haven't pulled
the trigger. I did some searching and finally found the p/n for the
factory hood stripe CR3Z 6320000-AC (the last two letters probably
change depending on color). http://www.tousleyfordparts.com
has it for 259.66 still pretty expensive but it is the factory part.
Tousley Ford is not too far from where I live so I could go pick it up
and save the shipping.
I've been watching the Promotorsports one on ebay just haven't pulled
the trigger. I did some searching and finally found the p/n for the
factory hood stripe CR3Z 6320000-AC (the last two letters probably
change depending on color). http://www.tousleyfordparts.com
has it for 259.66 still pretty expensive but it is the factory part.
Tousley Ford is not too far from where I live so I could go pick it up
and save the shipping.
Last edited by 12MCAV6PP; 2/4/12 at 11:43 AM.
#72
Legacy TMS Member
Thread Starter
I did some searching and finally found the p/n for the
factory hood stripe CR3Z 6320000-AC (the last two letters probably
change depending on color). http://www.tousleyfordparts.com
has it for 259.66 still pretty expensive but it is the factory part.
factory hood stripe CR3Z 6320000-AC (the last two letters probably
change depending on color). http://www.tousleyfordparts.com
has it for 259.66 still pretty expensive but it is the factory part.
#75
Legacy TMS Member
Thread Starter
#78
Legacy TMS Member
Thread Starter
dwtc has one on his 2011...with the GT500 mufflers, it really sounds great! I am crossing my fingers for an adaptation for the '05-'10s. The '11+ pipes won't fit on a '10 because of the engine configuration difference.
#80
Legacy TMS Member
Thread Starter
On a separate note, I will be getting a black Boss 302 lip spoiler and the rear decklid blackout put on the car soon. I waited awhile to see if I wanted to make the changes because I thought I might want to let the car go for a '13 Boss 302. Still having fun in the 2010 though!
Lastly, here are the measurements for the stripe. ProMotorSports did a great job on ensuring the C-part actually lined up with the stock GT emblem.