YaoNYC

i already made my choice on trufiber's '68 style hood.
$600...

http://alliance247.com/product.php?p...8a99b1ccf57e88

the KR hood is too far out and who knows? and the price willl be retarded LOL

G.T

YaoNYC: do you have the GT500 front fascia?

i'd go with the Trufiber hood.. but it won't look as good with a GT500 front fascia (neither would a KR hood on a stock GT!)

YaoNYC

this stopped my whole process of getting the GT500 fascia.

the BS and potential high cost of this KR stopped the whole process. i went with CS fascia and trufiber hood.

Twisted

I have the GT500 front on my car so it looks like I’ll be going with The Race Car Factory hood its a lot closer to the KR hood and is available now at much, much lower price.

I like the SS hood but I can think of a number of other mods I can do with the left over money.

G.T

Rob: i honestly doubt that hood would work well with the GT500 fascia..
it's made to fit the GT fascia, and has a flat "lip" compared to the raised one on the GT500..
a hood like that with much more pronounced features may look quite odd if it doesn't line up right with the front bumper :\

2006GT500

The Race Car Factory hood that he's talking about is made for the GT500 front fascia, Louie are you confusing it with the Dream Car Factory hood?

G.T

well apparently i am
i thought the race car factory hood resembled the KR hood, but was made for a GT (flat lip)

5150PONY

Have anyone contact Trufiber to see if they are willing to make this hood?
They already made the KR hood for the GT. All they gotta to is change the lip to make if fit the gt500 fascia....I dont see why they wouldnt do it if enough people show interest.

Just a though

armycook1981

Im want the SUpersnake vs the KR but will settle for the KR.... for some reason I like the way the nostirls are vs the kr

RobK

+1 This would be a great case study for a marketing/business development class as a classic "recipe for disaster".

jcthorne

Sorry but the race car factory hoods look not at all like the kr. The scoop is much too far back, the center strut of the nostrils is far to wide and the rear heat extractors are rearward facing rather than louver inserts.

Can't someone just make one that really looks like the KR? whats the big deal. Each vendor tries to 'make it better' and ends up mucking it up. Someone needs to do it right already and the company that does is going to sell a bunch of them. Why is this so difficult?

1FAFP90

I'm no expert, but could it be due to design copyright issues?

RobK

Formerly called, '68 hood...now calling it KR...

https://cervinis.com/product.aspx?car=1&id=1208#1177

Twisted

Apparently Amy and SAI don’t give a rat’s **** about us and the KR or SS hoods. Were going to have to go to other sources to get what we want.

Twisted

Quote:

Originally Posted by 1FAFP90

I'm no expert, but could it be due to design copyright issues?

As long as it is functional trademark issues can be skirted around, I went through something similar with Ferrari when I was manufacturing Testarossa replicas.

They claimed that the side scoops and strakes was their trademark and when the court asked what their purpose was their reply was to direct air into the engine compartment for cooling we were asked the same and our response was the same as theirs, its use was functional so it could not be used as their trademark so it was thrown out.

Design copyright is another issue and a huge gray area and usually ends up being on the side of the one with the most money and best attorneys. If it were a direct splash or copy there could be definite law suits but if it is changed a certain percentage then it usually falls back to the one with the most money and best attorneys.

GPStang06

Jeeez they even photoshopped the Alchoa (sp) wheels on there.

jcthorne

Closer but still wrong. First that hood is for a GT front end, not a GT500 so the front hood lines are wrong. Second the sides of the scoop are nearly verticle rather than splayed outward like the KR. Eventually someone will get it right. I hope.

I do this this is a better copy than the SS hood.

OKLACOP

Well, I thought I'd check in here to see if we had made any progress with the hood issue. I can see that we haven't. Good going Shelby!!!!!! I can appreciate all Shelby has done for the Mustang, but I feel that SAI has really messed up on this one. I'm no moneybags here, but I can afford to purchase their products. After this little episode I will not purchase anything else theat they produce. I'm pretty disgusted at this point. I know SAI could care less about the pocket change I've spent with them, but it makes me feel better to spend my money elsewhere.

BTW, If and when someone does manufacture a KR/SS type hood, lets try to start a new thread about that hood in "appearance mods." I think we have all said our piece here and this thread truely does appear to be dead!

G.T

it's funny how Amy is completely ignoring this thread
i'm pretty over it really.. having run after them practically begging over the phone and email and even here for maybe 2 months.. they gave me this crap.

to hell with it.. anyway this thing would have cost me 1000 dollars to ship to Dubai

amyb

I have said all along I am trying to give you real info, before I post.

The hoods will be in full production this month and be available by end of month, they will also be cheaper then the catalog price. I know you are excited about it, I am rushing, I want it right.


Amy