I just got my Shelby fuel rails today,here is a picture of what they look like,you can get them at the Shelby Store .com,thanks for looking in,

 

those are cool too, u must be getting a discount for promoting all these shelby parts

 

 

Those look like Metco's with a Shelby logo.

 

here is alittle more helpful info ,maybe ? in the install of the fuel rails [ATTACH][/ATTACH]

 

 

does anyone need a stock fuel rail,,I will try and post some pictures of my new Shelby fuel rail install tommrow,IS[1].7R3Z-9F792 05-10 Fuel Rail Installation Online.pdf if you use these steps / install papers you can do it ,it was pretty easy once I got started ,just took alittle time,thanks for looking in,

 

Yes.

 

here we go ,some pictures,

 

how about some more,,,,,,,

 

,,,,I have more,,,,,,,,,

 

I had a few more after I got it all back together,

 

just ordered this form Jegs.com ,,,Jegs part number is # 799-651106 ,it will replace the stock rubber fuel line coming off the fuel rail back to the fire wall just under the brake booster / tank,cost me $ 75.00,I will post some more pictures after I get it ,and installed ,thanks for looking in

 

GOT IT TODAY,LOOKS COOL,I WILL TRY AND POST SOME PICTURES SOON,maybe this weekend,also got the stock one off already,wasn't that hard to do,thanks for looking in.

 

also the fire wall fitting end is alittle different ,than is shown in picture posted here,fitting end is different,you'll see,,also comes all put together by Russell ,Russell fittings is own by Edelbrock.remember Russell part number is #651106.fuel hose kit.

 

 

 

Richard looks cool!

Is there a special tool required to remove the stock fuel line fitting at the firewall?

 

it takes a small spring lock tool its a 3/8 size,it comes off pretty easy,here are a few more pictures this pictures shows the spring lock tool in the middle of the two tube ends ( its the little white thing )







these are pictures of the stock fitting under the brake booster/ tank, you can get the spring lock tool at most parts stores ,around $ 10.00 to $ 20.00 dollars.they come in a set of six or five,

 

Richard, thanks so it is the same at both ends - 3/8" spring lock tool.