My wingless GT/CS
4/29/07, 09:08 AM
#5
Dethroned Nascar Guru
Looks good, but I'm biased for the spoiler delete look. I almost ordered a GT/CS and would have done the same thing. I was going to also remove the side GT/CS stripes and put on lower rocker stripes that read "GT/CS"
4/29/07, 10:05 AM
#6
Bullitt Member
Thread Starter
Join Date: April 29, 2007
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
LOL i got this car to tun it to something like the Shelby GT & when I got it home I could not do it. trunk is off another car.
AF blue if your in VA you need to come to www.mustangweek.com
AF blue if your in VA you need to come to www.mustangweek.com
4/29/07, 07:06 PM
#8
GT Member
Join Date: April 3, 2007
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
NIce look, but I still prefer the spoiler. But then, that's what it's all about and what makes Stang mods cool.
As far as the Ducktail, it looks good on the Shelby, wish I could buy the entire car, but it's not in the cards at the moment.
As far as the Ducktail, it looks good on the Shelby, wish I could buy the entire car, but it's not in the cards at the moment.
4/29/07, 08:00 PM
#9
That siht looks hot man
dont listen to them. 
I also wanted to do that but it's the wifes car and she likes it with the spoiler. i think that with a drop you will relize you dont need new wheels.
I also wanted to do that but it's the wifes car and she likes it with the spoiler. i think that with a drop you will relize you dont need new wheels.
4/30/07, 07:01 AM
#11
Mach 1 Member
I just installed the GT spoiler and looks awesome. Removing the old adhesive was harder than drilling and installing the new spoiler. It looks great, but after installing it I noticed a noticeable imperfection on the clearcoat. Looks like a bit of dirt got under the clearcoat. I'm going to have to remove it and either get it repainted or exchanged....arrrggghhh!!!! BTW, after looking at the wingless or GT spoiler...the winged spoiler lookes pretty gay.
4/30/07, 07:12 PM
#16
Mach 1 Member
And welcome.
4/30/07, 07:19 PM
#17
Bullitt Member
Thread Starter
Join Date: April 29, 2007
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
I guess just stick them in a corner they have 300 mi on them. I really hope the center from the stock wheels will fit or I will have to order something I dont like the snake at all.
4/30/07, 08:22 PM
#18
Cobra Member
Wingless...
I just finished removing the wing off of my GT/CS....and, found scratches between the bolt holes, and two dents under the supports. It appears whoever was building this car had a heavy hand when installing the wing. The dents are small but one in each corner where the supports rested on the trunk lid. . Most likely the bolts were over tightened. I am buffing the scratches now, but I do not have high hopes. Looks like a replacement ducktail spoiler or a new trunk lid without the holes. Have to think about this. I do like the look without the wing.
Also none of the holes are the same size. I have one that is egg shaped ??? Two that are fairly large and one small one. Anyone else notice this?
Also none of the holes are the same size. I have one that is egg shaped ??? Two that are fairly large and one small one. Anyone else notice this?
4/30/07, 08:45 PM
#19
Bullitt Member
Join Date: January 8, 2007
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
