stabilizer deployed is it possible to put back?
10/31/15, 10:39 AM
#1
Member
Thread Starter
Join Date: August 27, 2015
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
stabilizer deployed is it possible to put back?
Last night my car said serves advance track and caused all my wheels to lock up, caused my rear end to slide out and hit a curb, side airbag deployed and stabilizer deployed, nothing else. I was only going 20mph and thought it was strange for this to happen, the stabilizer deployed. Any way to lock this back in place?
10/31/15, 11:26 AM
#3
Member
Thread Starter
Join Date: August 27, 2015
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
11/1/15, 05:46 AM
#4
Legacy TMS Member
Join Date: January 25, 2010
Location: Massachusetts
Posts: 3,803
Received 1,528 Likes
on
1,046 Posts
curious, what "stabilizer" are you talking about, that can be "deployed" ?
never heard of it
never heard of it
11/1/15, 01:14 PM
#5
Member
Thread Starter
Join Date: August 27, 2015
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
11/1/15, 01:19 PM
#7
Member
Thread Starter
Join Date: August 27, 2015
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
11/1/15, 01:23 PM
#8
Cobra R Member
OK, is English your first language? I ask because "deployed" would suggest it did what it did on purpose (which it didn't). Just want to make sure everyone is clear as to what is going on.
If it broke off, which would not be a surprise given what happened, it is unlikely it can be just "put back on". Something likely broke, which will need to be replaced. A trustworthy and competent mechanic should have a look and see what is needed.
If it broke off, which would not be a surprise given what happened, it is unlikely it can be just "put back on". Something likely broke, which will need to be replaced. A trustworthy and competent mechanic should have a look and see what is needed.
11/1/15, 01:31 PM
#10
Cobra R Member
So are you suggesting the roll bar came off on purpose, as a safety feature? Again, are we talking about the same part? Nothing underneath the vehicle should become disconnected during a crash unless it was damaged during the crash. The only thing that "deploys" are air bags. Everything else breaks.
11/1/15, 01:45 PM
#11
Legacy TMS Member
If it is just a long (goes across from 1 side to the other) straight bar it might be the Pan hard Bar, it didn't deploy, it broke and it is not safe to drive. If it is an End Link take the other side off until fixed.
Since you hit a curb going side ways it might be the pan hard bar.
Since you hit a curb going side ways it might be the pan hard bar.
11/2/15, 04:05 AM
#14
Legacy TMS Member
Join Date: January 25, 2010
Location: Massachusetts
Posts: 3,803
Received 1,528 Likes
on
1,046 Posts
a picture would be worth a thousand words
Last edited by Bert; 11/2/15 at 05:08 AM.
do you mean sway bar? 
11/3/15, 11:04 AM
#19
Legacy TMS Member
Join Date: January 25, 2010
Location: Massachusetts
Posts: 3,803
Received 1,528 Likes
on
1,046 Posts
I still want to see the stabilizer that deployed!
I thought it was a new secret feature that I had never heard of before, got all excited and stuff.
I thought it was a new secret feature that I had never heard of before, got all excited and stuff.
