JUST INSTALLED ROUSH REAR SIDE SPLITTERS
3/25/14, 12:59 PM
#41
Banned
Thread Starter
Join Date: July 9, 2013
Location: Somewhere USA
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
3/25/14, 01:49 PM
#43
Banned
Join Date: July 4, 2012
Location: Washington, DC
Posts: 2,983
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I just looked up the price of that one $700+ and I am not sure about putting that much out just for a Front Splitter. Heck for that much I can buy the Roush Front Splitter, Roush Rear Spoiler, Painted, Installation Fee, and still have enough left for a Big Mac, Fries and a Sweet Tea.
$1,329.99 http://www.americanmuscle.com/boss30...tter-2013.html
+
$794.99 http://www.americanmuscle.com/boss-f...tter-13gt.html
to be correct with all the parts to have the look he has.
Last edited by TheDivaDanielle; 3/25/14 at 01:52 PM.
3/25/14, 01:53 PM
#44
Banned
Thread Starter
Join Date: July 9, 2013
Location: Somewhere USA
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
All parts needed are:
$1,329.99 http://www.americanmuscle.com/boss30...tter-2013.html
+
$794.99 http://www.americanmuscle.com/boss-f...tter-13gt.html
to be correct with all the parts to have the look he has.
$1,329.99 http://www.americanmuscle.com/boss30...tter-2013.html
+
$794.99 http://www.americanmuscle.com/boss-f...tter-13gt.html
to be correct with all the parts to have the look he has.
3/25/14, 05:24 PM
#47
Just seen the message.
It's a bit of a cost but in the end of the day I'll have a look that people want but won't get and it's proof in the pudding.
I saved cost doing some research though... About $600...that kit for 1300+ is not needed...just the boss spoiler and the LS splitter, the bracket could be bought separately for 78 bucks.
The bracket is the same one used on the 2012 GT kit. So I wasn't paying $600 for that crappy roush lower grille.
Cars going in next week for the roush hood scoop install and exterior mods will be complete.
Rear is stock except for the 4" outlaw pipes, GT/CS spoiler on the rear by the way.
It's a bit of a cost but in the end of the day I'll have a look that people want but won't get and it's proof in the pudding.
I saved cost doing some research though... About $600...that kit for 1300+ is not needed...just the boss spoiler and the LS splitter, the bracket could be bought separately for 78 bucks.
The bracket is the same one used on the 2012 GT kit. So I wasn't paying $600 for that crappy roush lower grille.
Cars going in next week for the roush hood scoop install and exterior mods will be complete.
Rear is stock except for the 4" outlaw pipes, GT/CS spoiler on the rear by the way.
3/26/14, 01:14 PM
#49
Banned
Thread Starter
Join Date: July 9, 2013
Location: Somewhere USA
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Just seen the message.
It's a bit of a cost but in the end of the day I'll have a look that people want but won't get and it's proof in the pudding.
I saved cost doing some research though... About $600...that kit for 1300+ is not needed...just the boss spoiler and the LS splitter, the bracket could be bought separately for 78 bucks.
The bracket is the same one used on the 2012 GT kit. So I wasn't paying $600 for that crappy roush lower grille.
Cars going in next week for the roush hood scoop install and exterior mods will be complete.
Rear is stock except for the 4" outlaw pipes, GT/CS spoiler on the rear by the way.
It's a bit of a cost but in the end of the day I'll have a look that people want but won't get and it's proof in the pudding.
I saved cost doing some research though... About $600...that kit for 1300+ is not needed...just the boss spoiler and the LS splitter, the bracket could be bought separately for 78 bucks.
The bracket is the same one used on the 2012 GT kit. So I wasn't paying $600 for that crappy roush lower grille.
Cars going in next week for the roush hood scoop install and exterior mods will be complete.
Rear is stock except for the 4" outlaw pipes, GT/CS spoiler on the rear by the way.
What LS Splitter ? What Bracket are we talking about ?
Isn't this the same one or not ? with everything included.
http://www.americanmuscle.com/boss-f...tter-13gt.html
Last edited by B's 5.0; 3/26/14 at 01:15 PM.
3/26/14, 03:07 PM
#50
The option american muscle gives you is to buy the boss splitter kit for $1329 plus the laguna splitter for $749 for the 13 gt.
In the $1329 kit there is a bracket that's needed for the splitter adjusters... This bracket can be purchased separately for $78 from them, so really all is needed to purchase is the boss kit for $639 plus the $749 laguna splitter and the bracket $78.... The bracket says for 12 gt but it's the same for 13 models.
No cutting... You just have to remove the facia and factory splitter and follow the easy instructions and 3 hrs later your done.
So it's $1466 instead of $2078... That's $600 in your pocket not there's and they won't tell you that of course.
In the $1329 kit there is a bracket that's needed for the splitter adjusters... This bracket can be purchased separately for $78 from them, so really all is needed to purchase is the boss kit for $639 plus the $749 laguna splitter and the bracket $78.... The bracket says for 12 gt but it's the same for 13 models.
No cutting... You just have to remove the facia and factory splitter and follow the easy instructions and 3 hrs later your done.
So it's $1466 instead of $2078... That's $600 in your pocket not there's and they won't tell you that of course.
3/26/14, 03:22 PM
#51
Banned
Thread Starter
Join Date: July 9, 2013
Location: Somewhere USA
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
The option american muscle gives you is to buy the boss splitter kit for $1329 plus the laguna splitter for $749 for the 13 gt.
In the $1329 kit there is a bracket that's needed for the splitter adjusters... This bracket can be purchased separately for $78 from them, so really all is needed to purchase is the boss kit for $639 plus the $749 laguna splitter and the bracket $78.... The bracket says for 12 gt but it's the same for 13 models.
No cutting... You just have to remove the facia and factory splitter and follow the easy instructions and 3 hrs later your done.
So it's $1466 instead of $2078... That's $600 in your pocket not there's and they won't tell you that of course.
In the $1329 kit there is a bracket that's needed for the splitter adjusters... This bracket can be purchased separately for $78 from them, so really all is needed to purchase is the boss kit for $639 plus the $749 laguna splitter and the bracket $78.... The bracket says for 12 gt but it's the same for 13 models.
No cutting... You just have to remove the facia and factory splitter and follow the easy instructions and 3 hrs later your done.
So it's $1466 instead of $2078... That's $600 in your pocket not there's and they won't tell you that of course.
1/30/23, 01:42 AM
#52
Member
Join Date: January 30, 2023
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Roush rear side splitters
I have the Roush rear side splitters for my 2013 Mustang and according to the online video for the installation, they mentioned a 'drilling template' to guide where to drill.
I don't have that template, does any know if I can download it from somewhere and maybe print it? If not, is it possible to install it accurately without it?
I don't have that template, does any know if I can download it from somewhere and maybe print it? If not, is it possible to install it accurately without it?
1/31/23, 12:34 PM
#53
Legacy TMS Member
Join Date: January 25, 2010
Location: Massachusetts
Posts: 3,803
Received 1,528 Likes
on
1,046 Posts
I think I would probably try to make a template from the part, using cardboard or something. I assume you can't simply drill through the part because they are blind holes or something like that. I think it is "possible" to install without the template, but probably very difficult to get all the holes just right so they line up correctly.
2/2/23, 01:40 AM
#54
2014 SGM Roush Stage 2 --------- Moderator------
I think I would probably try to make a template from the part, using cardboard or something. I assume you can't simply drill through the part because they are blind holes or something like that. I think it is "possible" to install without the template, but probably very difficult to get all the holes just right so they line up correctly.
Bert sounds like he has the right plan. I too think that making a template off of the part should get you there. Seeing the video, looks like even just a long piece of paper would work. Outline the part for each side and then follow what they did on the video. I am assuming this is the video you were referencing? If not maybe this would be helpful.
https://lmr.com/products/Roush-Chin-...litter-Install
Thread
Thread Starter
Forum
Replies
Last Post
roushcollection
Auto Shows and Events
0
7/28/15 02:08 PM