2010-2014 Mustang Information on The S197 {GenII}

2012 mustang GT, which mods?

Thread Tools
 
Search this Thread
 
Old 9/29/11 | 06:06 PM
  #41  
bob's Avatar
bob
Legacy TMS Member
 
Joined: May 16, 2004
Posts: 5,201
Likes: 17
From: Bristol, TN
Originally Posted by Kona Blur
I disagree that a pro-cal is not a performance mod??? Def improved the performance on my car when I had it (specifically throttle response)...
Agreed, I put the FRPP on both my 07 GT and the GT500 and I could tell a difference. They are extremely safe tunes and you dont have to worry about any compliance (smog) issues.

I've since moved on to a bit more aggressive tune on the GT500 but I've still got the FRPP CAI which IMO, the shield at least is the best one out there.
Old 9/29/11 | 08:53 PM
  #42  
jaybertx's Avatar
Mach 1 Member
 
Joined: May 1, 2011
Posts: 671
Likes: 3
From: Sarasota, FL
Originally Posted by Will3212
I'm debating between the Roush axel back and the GT500 axel back. Both don't require a tune, the GT500 AB is $400 less than the Roush. I know the GT500 AB is a simple bolt on installation, no drilling or anything, is the Roush also a simple bolt on? I'm planning to have my local shop do it for $60
The GT500 exhaust is $265 at American Muscle and the Roush is $419. That's only $155 difference, not $400.

You should do what I'm going to do: Buy the Roush and if you find it's too loud, sell them on here for a slight loss and you'll still have enough to buy the GT500s with a few bucks left over.

If you don't have a lift and don't spend a lot of time under cars, I would recommend paying the $60. I know that's not a "car guy" thing to do but saving the time and aggravation would be well worth it to me.

But if THESE disappear from your car I'd start hunting for a kid with Roush exhaust AND Pony valve stem covers on his bike and whip his butt.
Old 9/29/11 | 08:57 PM
  #43  
texastboneking's Avatar
Bear Eats King...
Bear ****s Bone
 
Joined: September 5, 2011
Posts: 5,302
Likes: 2
From: Cleburne, Tx
Originally Posted by jaybertx

The GT500 exhaust is $265 at American Muscle and the Roush is $419. That's only $155 difference, not $400.

You should do what I'm going to do: Buy the Roush and if you find it's too loud, sell them on here for a slight loss and you'll still have enough to buy the GT500s with a few bucks left over.

If you don't have a lift and don't spend a lot of time under cars, I would recommend paying the $60. I know that's not a "car guy" thing to do but saving the time and aggravation would be well worth it to me.

But if THESE disappear from your car I'd start hunting for a kid with Roush exhaust AND Pony valve stem covers on his bike and whip his butt.
Old 9/29/11 | 09:13 PM
  #44  
Hytek's Avatar
Shelby GT350 Member
 
Joined: July 9, 2011
Posts: 2,547
Likes: 2
From: IL
Originally Posted by jaybertx

But if THESE disappear from your car I'd start hunting for a kid with Roush exhaust AND Pony valve stem covers on his bike and whip his butt.
LMFAO!!

Seriously though, if you go with the Roush's please don't make a thread the next day complaining they are so loud that they rattled your e-brake button loose and you think the car is falling apart and going to explode. Just playin'...
Old 9/29/11 | 11:34 PM
  #45  
Kona Blur's Avatar
Bullitt Member
 
Joined: May 21, 2011
Posts: 505
Likes: 0
From: Austin, TX
Originally Posted by jaybertx

The GT500 exhaust is $265 at American Muscle and the Roush is $419. That's only $155 difference, not $400.

You should do what I'm going to do: Buy the Roush and if you find it's too loud, sell them on here for a slight loss and you'll still have enough to buy the GT500s with a few bucks left over.

If you don't have a lift and don't spend a lot of time under cars, I would recommend paying the $60. I know that's not a "car guy" thing to do but saving the time and aggravation would be well worth it to me.

But if THESE disappear from your car I'd start hunting for a kid with Roush exhaust AND Pony valve stem covers on his bike and whip his butt.
Nice
Old 9/30/11 | 09:05 AM
  #46  
DaSFGiants4Life's Avatar
Cobra Member
 
Joined: July 12, 2010
Posts: 1,310
Likes: 0
From: Southern California
Originally Posted by Uin2it

So add the FRPP Bolt In X-Pipe....it keeps the cats but it will make the tone a bit louder! That's my plan anyway....add the GT500's now. Then down the Rd switch out the Mid-Pipe & delete the resonators.
Sounds like you'll be paying more than the Roush's in the long run. I guess it just depends what sound your looking for. But I've heard that putting in a standard X pipe will actually lose some HP/ Torque as well as gives it a more "exotic" tone. Also that it was a huge PITA to have installed.

Why go through all that trouble when the Roush's sound like sex str8 from the box?
Old 10/2/11 | 04:25 PM
  #47  
Mustang_believer's Avatar
Member
 
Joined: October 1, 2011
Posts: 20
Likes: 0
Black Billet grille,GT500 spoiler,Roush side louvers(expensive).
Old 10/2/11 | 07:37 PM
  #48  
mburnette's Avatar
Bullitt Member
 
Joined: September 17, 2011
Posts: 209
Likes: 1
I received the Roush AB and put them on in about 1 1/2 hrs. I don't have a lift and didn't jack it up, so it was a tight fit, but not over the top hard at all. The hardest part was getting the stock off the hangers. Everything else - easy. The sound - absolutely sexy. The GT500 muffler set up was better than stock - but mellowed out too much. The Roush AB will mellow a little, but if you want it to be heard - just depress that gas pedal. One of the easiest and worthwhile upgrades I did.
Old 10/2/11 | 07:40 PM
  #49  
DaSFGiants4Life's Avatar
Cobra Member
 
Joined: July 12, 2010
Posts: 1,310
Likes: 0
From: Southern California
Originally Posted by mburnette
I received the Roush AB and put them on in about 1 1/2 hrs. I don't have a lift and didn't jack it up, so it was a tight fit, but not over the top hard at all. The hardest part was getting the stock off the hangers. Everything else - easy. The sound - absolutely sexy. The GT500 muffler set up was better than stock - but mellowed out too much. The Roush AB will mellow a little, but if you want it to be heard - just depress that gas pedal. One of the easiest and worthwhile upgrades I did.
100%
Old 10/3/11 | 07:40 AM
  #50  
vmilax2007's Avatar
V6 Member
 
Joined: January 24, 2011
Posts: 73
Likes: 0
From: Indianapolis
Originally Posted by mburnette
I received the Roush AB and put them on in about 1 1/2 hrs. I don't have a lift and didn't jack it up, so it was a tight fit, but not over the top hard at all. The hardest part was getting the stock off the hangers. Everything else - easy. The sound - absolutely sexy. The GT500 muffler set up was better than stock - but mellowed out too much. The Roush AB will mellow a little, but if you want it to be heard - just depress that gas pedal. One of the easiest and worthwhile upgrades I did.
Mega dittos my friend! Roush AB's are the best ABs you can buy...IMO!
Old 10/3/11 | 10:20 AM
  #51  
mburnette's Avatar
Bullitt Member
 
Joined: September 17, 2011
Posts: 209
Likes: 1
Originally Posted by vmilax2007
Mega dittos my friend! Roush AB's are the best ABs you can buy...IMO!
Stage 3 has a power pack deal for the Roush CAI and AB exhaust. CAI took about 20min and like I said the AB took about 1 1/2 with no help or lift. Besides body mods, this is the easiest and best investment for the coyote.

http://www.stage3motorsports.com/pro...haust-Kit.html
Old 10/12/11 | 11:21 PM
  #52  
shenglu's Avatar
Member
 
Joined: October 12, 2011
Posts: 3
Likes: 0
You like, I will get a axleback exhaust. It does not void the warranty, unless they want to be ad * CK. If you can even change the wheels, they can say, it affects your drive.
Old 10/13/11 | 02:49 PM
  #53  
Will3212's Avatar
Thread Starter
Bullitt Member
 
Joined: May 12, 2011
Posts: 360
Likes: 0
what do you think about the ford racing suspension set
http://www.americanmuscle.com/frpp-h...ck-0512gt.html

and the Eibach suspension set
http://www.americanmuscle.com/eibach...stem-1112.html

The Ford racing ones are more expensive but I don't know if they're better. If I buy the set I would have my local shop do it and pay them labor I mean they shouldn't mess it up right cause it should be simple to install. Anyone have this suspension set? how is it?
Old 2/2/12 | 01:51 PM
  #54  
jmfrost's Avatar
Member
 
Joined: February 24, 2011
Posts: 16
Likes: 0
From: Alabama
What would you recommmend now for suspension upgrades. I've been looking at the FRPP for listing price of 1399 $ I think is the price but didn't see some of what you listed like with the strut mounts, static shock, adjustable shocks. and what the difference I'm new to the modding thing by the way. I've done some modding but not much.
Old 2/2/12 | 03:06 PM
  #55  
RandyW's Avatar
Cobra Member
 
Joined: October 23, 2009
Posts: 1,312
Likes: 2
From: NW Minnesota
If you've got a manual transmission, I'd recommend getting a Steeda Tri-Ax shifter, although others will recommend one from MGW or Barton. Then top it off with a custom shift **** from Grabber Pony.
Old 2/2/12 | 04:59 PM
  #56  
2012GTCS's Avatar
Cobra R Member
 
Joined: June 24, 2011
Posts: 1,568
Likes: 0
From: Long Island
why pay all that for FRPP when you can get a set of Steeda Springs and some Koni Shocks/Struts and GT500 mounts much cheaper.
Old 2/2/12 | 04:59 PM
  #57  
2012GTCS's Avatar
Cobra R Member
 
Joined: June 24, 2011
Posts: 1,568
Likes: 0
From: Long Island
my actual opinion on a first mod would be a swap out of those wheels. They scream V6.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ecostang
'10-14 V6 Modifications
1661
11/3/22 08:50 PM
Detroit Steel
'10-14 Roush Mustangs
0
7/13/15 01:04 PM
Kev006
Repair and Service Help
0
7/8/15 05:29 AM



Quick Reply: 2012 mustang GT, which mods?



All times are GMT -6. The time now is 03:10 AM.