2010-2014 Ford Mustang S-197 Gen II Lets see your latest Pics PHOTO GALLERY
Post *****
Join Date: December 14, 2007
Location: State of Jefferson Mountains USA
Posts: 19,993
Likes: 0
Received 4 Likes
on
4 Posts
Shelby GT500 Member
Their kit comes with a twin 75mm T/B that I'm going to try. What size is your monoblade?
GT Member
Legacy TMS Member
Finally got my RTR decklid and MMD tail bezels installed! I plaatidipped them with the metallic graphite and glossifier. I still hate plastidip lol. I originally tried to wrap them with brushed metal vinyl...the decklid came out great, but the bezels were a B and did not come out well. Still, I think I may take everything off and try again, especially since the decklid is not flush at the top. The instructions just tell you to "align with decklid" but they don't tell you that you need to put the tape all the way to the edge of the panel, or it won't grab to your trunk. Everywhere else, it's on good, but the top edge is about 1/8" away almost all the way across. A project for next week I suppose...here's a couple pics and one from the front with it cleaned up after all that rain we had....
I'm probably going to change up the appearance a bit. After I replenish the bank accounts from Christmas shopping, I'm going to order the Boss 302S grille, Roush lower grille delete/side and rear splitters, and switch to golden yellow head light/fog light tint, black out the side markers and 3rd brake light.
Then whether I decide I keep the Plastidip or try to wrap the vinyl again, the Roush parts, my mud guards (front and rear) and the grille surround wi be done to match.
I'm probably going to change up the appearance a bit. After I replenish the bank accounts from Christmas shopping, I'm going to order the Boss 302S grille, Roush lower grille delete/side and rear splitters, and switch to golden yellow head light/fog light tint, black out the side markers and 3rd brake light.
Then whether I decide I keep the Plastidip or try to wrap the vinyl again, the Roush parts, my mud guards (front and rear) and the grille surround wi be done to match.
Last edited by laserred38; 12/22/14 at 09:04 AM.
Cobra R Member
Join Date: September 22, 2012
Location: Ontario, California
Posts: 1,691
Likes: 0
Received 17 Likes
on
17 Posts
Finally got my RTR decklid and MMD tail bezels installed! I plaatidipped them with the metallic graphite and glossifier. I still hate plastidip lol. I originally tried to wrap them with brushed metal vinyl...the decklid came out great, but the bezels were a B and did not come out well. Still, I think I may take everything off and try again, especially since the decklid is not flush at the top. The instructions just tell you to "align with decklid" but they don't tell you that you need to put the tape all the way to the edge of the panel, or it won't grab to your trunk. Everywhere else, it's on good, but the top edge is about 1/8" away almost all the way across. A project for next week I suppose...here's a couple pics and one from the front with it cleaned up after all that rain we had....
Legacy TMS Member
Roush Forum Stalker
Finally got my RTR decklid and MMD tail bezels installed! I plaatidipped them with the metallic graphite and glossifier. I still hate plastidip lol. I originally tried to wrap them with brushed metal vinyl...the decklid came out great, but the bezels were a B and did not come out well. Still, I think I may take everything off and try again, especially since the decklid is not flush at the top. The instructions just tell you to "align with decklid" but they don't tell you that you need to put the tape all the way to the edge of the panel, or it won't grab to your trunk. Everywhere else, it's on good, but the top edge is about 1/8" away almost all the way across. A project for next week I suppose...here's a couple pics and one from the front with it cleaned up after all that rain we had....
I'm probably going to change up the appearance a bit. After I replenish the bank accounts from Christmas shopping, I'm going to order the Boss 302S grille, Roush lower grille delete/side and rear splitters, and switch to golden yellow head light/fog light tint, black out the side markers and 3rd brake light.
Then whether I decide I keep the Plastidip or try to wrap the vinyl again, the Roush parts, my mud guards (front and rear) and the grille surround wi be done to match.
I'm probably going to change up the appearance a bit. After I replenish the bank accounts from Christmas shopping, I'm going to order the Boss 302S grille, Roush lower grille delete/side and rear splitters, and switch to golden yellow head light/fog light tint, black out the side markers and 3rd brake light.
Then whether I decide I keep the Plastidip or try to wrap the vinyl again, the Roush parts, my mud guards (front and rear) and the grille surround wi be done to match.
Love the stance, the wheels and those exhaust tips really set the car off. LOVE the wheels on that car.
Legacy TMS Member
Thank you sir haha. Actually I kinda want to go lower. And wider on the wheels lol. May get these same ones but go 20x10 all around for my summer wheels
Mach 1 Member
Join Date: March 27, 2014
Location: Winnipeg, MB
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
Finally got my RTR decklid and MMD tail bezels installed! I plaatidipped them with the metallic graphite and glossifier. I still hate plastidip lol. I originally tried to wrap them with brushed metal vinyl...the decklid came out great, but the bezels were a B and did not come out well. Still, I think I may take everything off and try again, especially since the decklid is not flush at the top. The instructions just tell you to "align with decklid" but they don't tell you that you need to put the tape all the way to the edge of the panel, or it won't grab to your trunk. Everywhere else, it's on good, but the top edge is about 1/8" away almost all the way across. A project for next week I suppose...here's a couple pics and one from the front with it cleaned up after all that rain we had....
I'm probably going to change up the appearance a bit. After I replenish the bank accounts from Christmas shopping, I'm going to order the Boss 302S grille, Roush lower grille delete/side and rear splitters, and switch to golden yellow head light/fog light tint, black out the side markers and 3rd brake light.
Then whether I decide I keep the Plastidip or try to wrap the vinyl again, the Roush parts, my mud guards (front and rear) and the grille surround wi be done to match.
I'm probably going to change up the appearance a bit. After I replenish the bank accounts from Christmas shopping, I'm going to order the Boss 302S grille, Roush lower grille delete/side and rear splitters, and switch to golden yellow head light/fog light tint, black out the side markers and 3rd brake light.
Then whether I decide I keep the Plastidip or try to wrap the vinyl again, the Roush parts, my mud guards (front and rear) and the grille surround wi be done to match.
Car looks amazing man. Great look all around. Love it.
Roush Forum Stalker
V6 Member
Join Date: August 2, 2013
Location: Nebraska
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Legacy TMS Member
V6 Member
Join Date: August 2, 2013
Location: Nebraska
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
I Have No Life
Finally got my RTR decklid and MMD tail bezels installed! I plaatidipped them with the metallic graphite and glossifier. I still hate plastidip lol. I originally tried to wrap them with brushed metal vinyl...the decklid came out great, but the bezels were a B and did not come out well. Still, I think I may take everything off and try again, especially since the decklid is not flush at the top. The instructions just tell you to "align with decklid" but they don't tell you that you need to put the tape all the way to the edge of the panel, or it won't grab to your trunk. Everywhere else, it's on good, but the top edge is about 1/8" away almost all the way across. A project for next week I suppose...here's a couple pics and one from the front with it cleaned up after all that rain we had.... I'm probably going to change up the appearance a bit. After I replenish the bank accounts from Christmas shopping, I'm going to order the Boss 302S grille, Roush lower grille delete/side and rear splitters, and switch to golden yellow head light/fog light tint, black out the side markers and 3rd brake light. Then whether I decide I keep the Plastidip or try to wrap the vinyl again, the Roush parts, my mud guards (front and rear) and the grille surround wi be done to match.