Factory Engine Cover $$$$$$$$$
#101
Originally posted by 05stangkc@December 16, 2005, 8:23 AM
It's Gonna Be Plastic I am Pretty Sure.
kc
It's Gonna Be Plastic I am Pretty Sure.
kc
#104
I'd definately buy one for under $70 bucks. The midwest version just looks too generic without adding your own special touches and cost way too much IMO for what it is.
Looking forward for these.
Looking forward for these.
#107
Count me in as well. The Midwest Auto Gear cover looks too much like a modified shoebox IMO. There is a company called BBK that makes a platistic chrome-finished plenum cover for the 2005+ GT that looks better than the Midwest Auto Gear piece, but it goes for around $250.
#109
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,901
Received 3,157 Likes
on
2,311 Posts
Please Post Notify when available for an email when cover is released. It's Most likely going to be Early June!
kc
kc
#110
Mach 1 Member
Originally posted by 05stangkc@January 20, 2006, 10:57 PM
Please Post Notify when available for an email when cover is released. It's Most likely going to be Early June!
kc
Please Post Notify when available for an email when cover is released. It's Most likely going to be Early June!
kc
#111
Something to consider for those hoping to fit a strut tower brace over it:
In the pictures the ford cover looks to be taller at the back than the front, tapering from back to front. You can see it looking at the difference in height between the plenum "notches" and top. The midwest plenum cover is the same front-to-back. I don't know if the midwest is just taller overall and a tower brace would fit over the ford cover better, or if ford's is taller where the brace would cross it because of the taper. I'm betting ford's is taller at the back.
Just my 2 cents.
My midwest cover:
[attachmentid=43333]
Ford cover (from pre-production show car):
[attachmentid=43334]
In the pictures the ford cover looks to be taller at the back than the front, tapering from back to front. You can see it looking at the difference in height between the plenum "notches" and top. The midwest plenum cover is the same front-to-back. I don't know if the midwest is just taller overall and a tower brace would fit over the ford cover better, or if ford's is taller where the brace would cross it because of the taper. I'm betting ford's is taller at the back.
Just my 2 cents.
My midwest cover:
[attachmentid=43333]
Ford cover (from pre-production show car):
[attachmentid=43334]
#113
Originally posted by NHstang@January 21, 2006, 8:21 AM
Something to consider for those hoping to fit a strut tower brace over it:
In the pictures the ford cover looks to be taller at the back than the front, tapering from back to front. You can see it looking at the difference in height between the plenum "notches" and top. The midwest plenum cover is the same front-to-back. I don't know if the midwest is just taller overall and a tower brace would fit over the ford cover better, or if ford's is taller where the brace would cross it because of the taper. I'm betting ford's is taller at the back.
Just my 2 cents.
My midwest cover:
[attachmentid=43333]
Ford cover (from pre-production show car):
[attachmentid=43334]
Something to consider for those hoping to fit a strut tower brace over it:
In the pictures the ford cover looks to be taller at the back than the front, tapering from back to front. You can see it looking at the difference in height between the plenum "notches" and top. The midwest plenum cover is the same front-to-back. I don't know if the midwest is just taller overall and a tower brace would fit over the ford cover better, or if ford's is taller where the brace would cross it because of the taper. I'm betting ford's is taller at the back.
Just my 2 cents.
My midwest cover:
[attachmentid=43333]
Ford cover (from pre-production show car):
[attachmentid=43334]
#117
Originally posted by kevinb120@January 21, 2006, 7:02 PM
Well the motor actually tilts down in the back like most rwd cars
Well the motor actually tilts down in the back like most rwd cars
#118
Legacy TMS Member
Originally posted by 05stangkc@January 20, 2006, 9:57 PM
Please Post Notify when available for an email when cover is released. It's Most likely going to be Early June!
kc
Please Post Notify when available for an email when cover is released. It's Most likely going to be Early June!
kc
#119
KC. Looks like we have a lot of people who want one. Can we get a group buy in for early purchase prior to the other dealers getting them? If we pay up front your dealership could order a large quantity.