2013 Mustang Retrofit Question Forum
#1
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,992
Received 3,208 Likes
on
2,353 Posts
2013 Mustang Retrofit Question Forum
Hello,
This used to be a regular deal for me and usually I am posting parts info before we get all the nice pictures from FORD. Anyhoo. I have access to some 2013 Parts info and I will try and answer any questions you have. I will not be posting any part numbers at the moment as a lot of stuff is tentitive.
No sense in me looking for Items unless there is an interest in them.
The 2013 Parts will start releasing in Late march. Most will not be priced as yet but I can usually tell by the part numbers what will interchange in some instances. Pricing will trickle in over the next three months.
I can tell you the 2013 Tail lamps themselves are about $950.00 Msrp Per Side. I am doubtful these will be a plug and play on the 10-12's but I will research when more info is available. I know there is interest in these.
The Gt-500 Info is very slim but the V6 & GT & Boss Info is pretty good. If you find a pic of a part or option you like please post a pic and ask away. Realize I have to do a lot of educated guessing on some of this but those of you who have been around since 04 Know I am pretty good at it.
Oh and a little tidbit those who have seen the New 2013 DEEP IMPACT BLUE say it looks just like the 05 SONIC BLUE.
Enjoy,
KC
This used to be a regular deal for me and usually I am posting parts info before we get all the nice pictures from FORD. Anyhoo. I have access to some 2013 Parts info and I will try and answer any questions you have. I will not be posting any part numbers at the moment as a lot of stuff is tentitive.
No sense in me looking for Items unless there is an interest in them.
The 2013 Parts will start releasing in Late march. Most will not be priced as yet but I can usually tell by the part numbers what will interchange in some instances. Pricing will trickle in over the next three months.
I can tell you the 2013 Tail lamps themselves are about $950.00 Msrp Per Side. I am doubtful these will be a plug and play on the 10-12's but I will research when more info is available. I know there is interest in these.
The Gt-500 Info is very slim but the V6 & GT & Boss Info is pretty good. If you find a pic of a part or option you like please post a pic and ask away. Realize I have to do a lot of educated guessing on some of this but those of you who have been around since 04 Know I am pretty good at it.
Oh and a little tidbit those who have seen the New 2013 DEEP IMPACT BLUE say it looks just like the 05 SONIC BLUE.
Enjoy,
KC
Last edited by 05stangkc; 12/10/11 at 02:36 PM.
#2
Cobra R Member
hi kevin, do you show a price on the boss/cs black rear lower valance?
the 13 gt doesn't come with one, i assume it's just a bolt on
but you could check the cs or boss & gt bumper covers to make sure they're the same.
thanks!
the 13 gt doesn't come with one, i assume it's just a bolt on
but you could check the cs or boss & gt bumper covers to make sure they're the same.
thanks!
#3
legacy Tms Member
$950.00 FOR JUST FOR ONE TAILLIGHT? wow. hope the aftermarket folks are on the ball here and get lenses/bumper covers developed...no matter how good they look, thats steep.
although not as bad as the 23,000.00 shelby hood, it seems up there in that 'screw the customer' range...
wonder what msrp is on current lenses? would think 200 a side would be about max
although not as bad as the 23,000.00 shelby hood, it seems up there in that 'screw the customer' range...
wonder what msrp is on current lenses? would think 200 a side would be about max
#5
Originally Posted by ford4v429
$950.00 FOR JUST FOR ONE TAILLIGHT? wow. hope the aftermarket folks are on the ball here and get lenses/bumper covers developed...no matter how good they look, thats steep.
although not as bad as the 23,000.00 shelby hood, it seems up there in that 'screw the customer' range...
wonder what msrp is on current lenses? would think 200 a side would be about max
although not as bad as the 23,000.00 shelby hood, it seems up there in that 'screw the customer' range...
wonder what msrp is on current lenses? would think 200 a side would be about max
Last edited by 11SHELBYGT500; 12/10/11 at 05:41 PM.
#9
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,992
Received 3,208 Likes
on
2,353 Posts
In regards to 2010 to 2013 Parts retrofit it appears at the moment that enough structural pieces are carry over to do the deed. The big question is how the cover would look/fit in the Taillight Area. I will have to wait for further info to release to make that call.
KC
#10
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,992
Received 3,208 Likes
on
2,353 Posts
This is how Ford Parts sells their seats. Piece by Piece. This is a very expensive seat to put together. By the time you are done with every last thing in the front seats you would likely be at about $4000.00 + for Each seat.
If you are ordering a car and want the seats I advise you to get them with the car. If you want to retrofit, a wrecked car would be the cost effective way down the road. Also realize depending on the seats and the car you want to put them in you have side airbags to consider.
It is possible FORD RACING may come out with something down the road. But as far as through Dealership parts it's piece by piece.
Last edited by 05stangkc; 12/11/11 at 12:01 PM.
#11
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,992
Received 3,208 Likes
on
2,353 Posts
I would also interject that an option on a factory order if far cheaper than piecing together in many instances. Realize you are upgrading an existing item. The standard seat cost is deducted from the additional cost of the Recaro upgrade.
Kc
#12
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,992
Received 3,208 Likes
on
2,353 Posts
I have no pricing yet but I have a part number.
Btw, when I was reseaching this I found a notation in the cataloging about a MACH 1 option. First time I have seen this mentioned.
Name Plate
GT, Less Mach 1 Appearance Group; Decklid, Faux Gas Cap
KC
Btw, when I was reseaching this I found a notation in the cataloging about a MACH 1 option. First time I have seen this mentioned.
Name Plate
GT, Less Mach 1 Appearance Group; Decklid, Faux Gas Cap
KC
Last edited by 05stangkc; 12/11/11 at 12:41 PM.
#13
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,992
Received 3,208 Likes
on
2,353 Posts
brembo r
Do you have any info for the new brembo race package for the 2013? Are they different calipers/pads?
__________________
I was asked this by Mikes 5.0 in my PM section & decided to answer this here.
Mike,
So far all I have found are some new SVT Front pads that List for $652.00 a set. I will have to wait for more info to release to expand on this.
KC
Do you have any info for the new brembo race package for the 2013? Are they different calipers/pads?
__________________
I was asked this by Mikes 5.0 in my PM section & decided to answer this here.
Mike,
So far all I have found are some new SVT Front pads that List for $652.00 a set. I will have to wait for more info to release to expand on this.
KC
#14
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,992
Received 3,208 Likes
on
2,353 Posts
I do have a bit of more conclusive info on the 2013 Heated Mirrors. They Run $261.00 a side MSRP. and they appear to use the 2010 up Covers so Fit should not be an issue. I would not be surprized if they Plug & Play on a non Heated 2013 Application but can not confirm this. I will have to wait for more info to release to finalize the call on this.
On a 2005-2012 Retrofit I am guessing they could be wired into the Rear Window defrost circut. I will need to see some more info to finalize this retrofit as well.
KC
On a 2005-2012 Retrofit I am guessing they could be wired into the Rear Window defrost circut. I will need to see some more info to finalize this retrofit as well.
KC
#16
Cobra R Member
Ok , Now realize at the moment I am dealing with TEXT only. At the moment it looks like we are dealing with Two Cover Styles. I found two part numbers. One a solid Type appears to be with diffuser moulded in and another with a Removable Diffuser. I will have to wait for further info to release. No pricing yet on any of those items. I don't think the Diffuser is an overlay. This is in regards to a 2013 to 2013 Swap.g
KC
KC
the bumper covers still may be the same even if they have diff p/n's.
the '93 front bumpers on the GT & Cobra had diff p/n's but were identical, the Cobra just came with the hole cut out for the insert..
#18
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,992
Received 3,208 Likes
on
2,353 Posts
Kc
#19
Bullitt Member
Join Date: May 3, 2010
Location: So Cal
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
If the Pony projector under the mirror is a separate lense part #, I bet it can be placed under an existing S197 mirror. Wired into the dome lights perhaps to turn on with the unlock feature.
I'd like some of the GT500 front Brembos and CF driveshaft. Possibly the Bilsteins as well.
I'd like some of the GT500 front Brembos and CF driveshaft. Possibly the Bilsteins as well.
#20
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,992
Received 3,208 Likes
on
2,353 Posts
Now that the order guide is out I am sure a lot of new questions will surface. I will answer as more parts / service info is released.
KC
KC