2007 Shelby Hi-Tech High Speed Wiper Blades
#28
Thread Starter
The Analog Admin!
Joined: November 27, 2004
Posts: 11,080
Likes: 3,265
From: Visalia Ca.
A Tool Similar to this should do the trick. You will want to take the nut off and reinstall upside down for a nice flat surface to push against. Just loosen a turn or two to break the press fit with the puller.
KC
#29
http://www.summitracing.com/parts/OTC-4676
#30
Thread Starter
The Analog Admin!
Joined: November 27, 2004
Posts: 11,080
Likes: 3,265
From: Visalia Ca.
You could pick one of these, OTC 4676, up at most auto parts stores.
http://www.summitracing.com/parts/OTC-4676
http://www.summitracing.com/parts/OTC-4676
Thanks!
KC
#34
Thread Starter
The Analog Admin!
Joined: November 27, 2004
Posts: 11,080
Likes: 3,265
From: Visalia Ca.
UPDATED
UPDATE 07/31/2022
The Shelby Wiper Setup Part Numbers. The Blades are Available but the Arms are Obsolete so you would need to search for NOS or USED ARMS. From 07-09 Shelby Upgrades 05-09 Cars. Upon New Research I find the 2010-2014 Arms on All Mustangs are The Same as The 07-09 Shelbys. So Should Be Plenty of Used Arms Out There.
7R3Z-17528-AB R/S Pass. Blade 20" Replaced By AR3Z-17528-A
7R3Z-17528-BA L/S Driver Blade 22" Replaced By AR3Z-17528-B
7R3Z-17526-A R/S Arm
7R3Z-17527-A L/S Arm
NEW REFERENCE PICS BELOW
FYI
The 2007 Shelby GT-500 uses a High Tech Style Wiperblade Setup As Shown in the Pics. The Blades have a Flat Metal Strap with a Wedge or Spoiler Attached to it which at High Speeds Put More Downforce on the Blade for better Visability. These Will retro fit onto other 05up Mustangs but will require New wiper Arms. Be aware that Ford Sells Wiper Blades in Boxes of ten and Most dealerships will not want to order you just a Pair and Have 18 Blades lying around. Shelby Owners Also be aware when you need Some replacements your Local Dealer may not want to order yours either. Due to my internet sales I went ahead and took the Plunge to stock these! Plan Ahead and get a Set today! FYI these Due NOT FIT ANY OTHER FORD MODELS.
Enjoy,
Kc
The First Set is going on my GT/CS. I am Not very satisfied with the Current Wiper blade performance and believe these will be an improvement.
Old Wiper Arm Style Top, New On Bottom
Old Style Blade
New Style
The Shelby Wiper Setup Part Numbers. The Blades are Available but the Arms are Obsolete so you would need to search for NOS or USED ARMS. From 07-09 Shelby Upgrades 05-09 Cars. Upon New Research I find the 2010-2014 Arms on All Mustangs are The Same as The 07-09 Shelbys. So Should Be Plenty of Used Arms Out There.
7R3Z-17528-AB R/S Pass. Blade 20" Replaced By AR3Z-17528-A
7R3Z-17528-BA L/S Driver Blade 22" Replaced By AR3Z-17528-B
7R3Z-17526-A R/S Arm
7R3Z-17527-A L/S Arm
NEW REFERENCE PICS BELOW
FYI
The 2007 Shelby GT-500 uses a High Tech Style Wiperblade Setup As Shown in the Pics. The Blades have a Flat Metal Strap with a Wedge or Spoiler Attached to it which at High Speeds Put More Downforce on the Blade for better Visability. These Will retro fit onto other 05up Mustangs but will require New wiper Arms. Be aware that Ford Sells Wiper Blades in Boxes of ten and Most dealerships will not want to order you just a Pair and Have 18 Blades lying around. Shelby Owners Also be aware when you need Some replacements your Local Dealer may not want to order yours either. Due to my internet sales I went ahead and took the Plunge to stock these! Plan Ahead and get a Set today! FYI these Due NOT FIT ANY OTHER FORD MODELS.
Enjoy,
Kc
The First Set is going on my GT/CS. I am Not very satisfied with the Current Wiper blade performance and believe these will be an improvement.
Old Wiper Arm Style Top, New On Bottom
Old Style Blade
New Style
Last edited by 05stangkc; 8/2/22 at 08:41 AM.
Thread
Thread Starter
Forum
Replies
Last Post