Kyle's '99 GT
#1
GT Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: August 30, 2007
Location: Connecticut
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Kyle's '99 GT
After the loss on my beloved '03 Crown Vic (which still makes me sad), three months later this came along. It's a '99 GT, electric green, and previously a gentleman's mildly modded weekend driver. No track time spent despite the mods, and the best part, only 64,000 miles.
There is a lot to list which I'll post after placing everything in order, but there is a lot to it. It drives very smooth, and is very solid, no rattles, leaks, and hopefully nothing else (knock on wood)
There is a lot to list which I'll post after placing everything in order, but there is a lot to it. It drives very smooth, and is very solid, no rattles, leaks, and hopefully nothing else (knock on wood)
Last edited by Grand Marquis427; 5/23/12 at 10:11 AM.
#3
GT Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: August 30, 2007
Location: Connecticut
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, man.
Here's the parts list. Still figuring out the tuner since it's an older one.
SUSPENSION:
Maximum Motorsports full length subframe connectors
CHP caster/camber plates
Ford Racing Coil Springs
CHP Upper/Lower control arms
DRIVETRAIN:
TCI 7qt transmission pan
TCI shift kit/Go valve body
Ford Racing aluminum driveshaft
Ford Racing transmission cooler
Strange 31 spline axles
Terminator Cobra/Ford Racing differential
3.73 gear
PERFORMANCE PARTS:
SCT Xcalibrater 2
MAC cold air intake
Professional Products intake plenum and throttle body
Dynomax SS cat back exhaust and high flow cats (x-pipe)
EXTRAS:
American Muscle projector headlights
FR500 rims
18x9 front
18x10 rear
Nitto NT555 tires – 5,000 miles
265 front
285 rear
Here's the parts list. Still figuring out the tuner since it's an older one.
SUSPENSION:
Maximum Motorsports full length subframe connectors
CHP caster/camber plates
Ford Racing Coil Springs
CHP Upper/Lower control arms
DRIVETRAIN:
TCI 7qt transmission pan
TCI shift kit/Go valve body
Ford Racing aluminum driveshaft
Ford Racing transmission cooler
Strange 31 spline axles
Terminator Cobra/Ford Racing differential
3.73 gear
PERFORMANCE PARTS:
SCT Xcalibrater 2
MAC cold air intake
Professional Products intake plenum and throttle body
Dynomax SS cat back exhaust and high flow cats (x-pipe)
EXTRAS:
American Muscle projector headlights
FR500 rims
18x9 front
18x10 rear
Nitto NT555 tires – 5,000 miles
265 front
285 rear
#9
GT Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: August 30, 2007
Location: Connecticut
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Thanks folks. and I do agree with you Dakota. It seems that when the wing was taken off to be painted, it was put back on further up. Providing it isn't too much hassle, I'll have it moved back.
Also (and not to get too off subject), is that a lion head rabbit? as your avatar picture?
Also (and not to get too off subject), is that a lion head rabbit? as your avatar picture?
#10
Mach 1 Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: April 18, 2011
Location: Minnesota
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Grand Marquis427
Thanks folks. and I do agree with you Dakota. It seems that when the wing was taken off to be painted, it was put back on further up. Providing it isn't too much hassle, I'll have it moved back.
Also (and not to get too off subject), is that a lion head rabbit? as your avatar picture?
Also (and not to get too off subject), is that a lion head rabbit? as your avatar picture?
Have you thought about tinting that third break light since its fading away?
Last edited by Dbranham; 5/22/12 at 06:24 AM.
#11
GT Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: August 30, 2007
Location: Connecticut
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
With that brake light I'll either do a direct replacement or the tinting providing it isn't that difficult.
#12
Mach 1 Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: April 18, 2011
Location: Minnesota
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
I've never tinted my light but I did have tail light and head light covers that have the tint look but I look them off because I lost one the tail light ones and I finally decided the car looked better without covers.
I'm sure you could either find a shop to tint it or you could try it yourself.
I'm sure you could either find a shop to tint it or you could try it yourself.
#13
GT Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: August 30, 2007
Location: Connecticut
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
a friend with a fully built Eagle Talon tinted his head and taillights with Night Shades, a do-it-yourself kit. he did layers for it for blend them nicely with the car but he also has HID's for both lights and they shine right through.
#14
Mach 1 Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: April 18, 2011
Location: Minnesota
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
With my headlight covers on you could hardly see anything. But I got used to it and still drove with them for about 4 months.
The
Photo is with one on and one not to compare
The
Photo is with one on and one not to compare
#17
NTTAWWT
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
that's actually the correct position for the spoiler on the 99's, until they went to a different style spoiler in 03 I believe, it was further forward. here's another 99
![](http://www.mustang-club.com/clubcars_modern/cb_1999_mustang_gt_06.jpg)
#20
GT Member
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: August 30, 2007
Location: Connecticut
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Thanks folks. It seems like the spoiler was moved back at some point then moved forward. I just washed the car and took a better look and you can see the shape of the spoiler on the trunk lid where it was moved back, and not to mention, there's rubber plugs right behind it.
The Cobra spoiler wouldn't be bad, but I've got a bit of a soft spot for the Roush Mustang of this era. More importantly there are a few age things to take of, as well as a job to pay for it :P
It was burning gas pretty well on the 93 octane setting since the tuner only has canned SCT tunes and nothing custom, and the SCT 87 tune is for a nitrous setup...why, I have no idea.
With confirmation from Bama tuning at American Muscle, I set it back to "stock" to run on 87 for now until I can pay for the tunes for life from them. It seems to actually run smoother on the 87 setting.
And man...does this baby handle. It's been raining the past few days but the suspension with the Nitto NT555 are just insane. I was in a big empty lot and tried to kick the rear around to get a feel for it and it wouldn't have it. It threw me through the curve with reckless authority. In a good way of course
The Cobra spoiler wouldn't be bad, but I've got a bit of a soft spot for the Roush Mustang of this era. More importantly there are a few age things to take of, as well as a job to pay for it :P
It was burning gas pretty well on the 93 octane setting since the tuner only has canned SCT tunes and nothing custom, and the SCT 87 tune is for a nitrous setup...why, I have no idea.
With confirmation from Bama tuning at American Muscle, I set it back to "stock" to run on 87 for now until I can pay for the tunes for life from them. It seems to actually run smoother on the 87 setting.
And man...does this baby handle. It's been raining the past few days but the suspension with the Nitto NT555 are just insane. I was in a big empty lot and tried to kick the rear around to get a feel for it and it wouldn't have it. It threw me through the curve with reckless authority. In a good way of course
![Smile](https://themustangsource.com/forums/images/smilies/smile.gif)