Brad's 1995 Mustang GT Progress thread
1/4/09, 10:23 AM
#201
Bullitt Member
Thread Starter
Join Date: February 26, 2008
Location: San Leandro, California
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
its not but the car doesnt get driven so im gonna put the turn downs on asap but its not a extra extra important thing on my list
1/4/09, 10:36 AM
#202
Cobra Member
Join Date: August 29, 2007
Location: smallest state in the union.
Posts: 1,093
Likes: 0
Received 0 Likes
on
0 Posts
personally, I would concentrate on maintenance stuff to make the car run as nice as it can, within your budget. Don't worry about appearance issues as much as function. Perform a tune up, check other routine things. Make sure everything is working right...once you have the car running right, then worry about looks...just my .02 .....
1/4/09, 11:24 AM
#204
Post *****
Join Date: May 13, 2004
Location: Berkeley/Redwood City, CA
Posts: 18,613
Likes: 0
Received 3 Likes
on
2 Posts
hahahaha i;ve been there, kinda. Before I had the correct V8 manifolds for the II, I was useing factory foxbody shorties, but they wouldn't face the normal way, so i ran em backwards and open. so the fumes built up in the engine back and came in through the heater vents
on the plus side, i could show off that my exhaust spat fire when i popped the hood. on the downside, the fire was under my hood! lol
ahh good times
1/4/09, 11:32 AM
#205
Legacy TMS Member Pr
1/7/09, 09:10 PM
#207
Bullitt Member
Thread Starter
Join Date: February 26, 2008
Location: San Leandro, California
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Well its official I want these
http://www.latemodelrestoration.com/...0%201&comp=LRS
does anyone want some black bullitts with a red tape pinstripe?
http://www.latemodelrestoration.com/...0%201&comp=LRS
does anyone want some black bullitts with a red tape pinstripe?
1/9/09, 09:06 PM
#209
Bullitt Member
Thread Starter
Join Date: February 26, 2008
Location: San Leandro, California
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Well I got my chin spoiler, floor mats and 96 tails!!!!!
The tails need work though so thats my weekend project since I dont have my drill over here for the chinspoiler
The tails need work though so thats my weekend project since I dont have my drill over here for the chinspoiler
1/11/09, 06:06 AM
#216
Legacy TMS Member Pr
Well its official I want these
http://www.latemodelrestoration.com/...0%201&comp=LRS
does anyone want some black bullitts with a red tape pinstripe?
http://www.latemodelrestoration.com/...0%201&comp=LRS
does anyone want some black bullitts with a red tape pinstripe?
1/12/09, 07:25 PM
#217
Join Date: August 23, 2004
Location: Bay Area, California
Posts: 3,599
Likes: 0
Received 3 Likes
on
2 Posts
Originally Posted by MadStang
Originally Posted by 95_5.0@15
what nut is that
Originally Posted by justinschmidt1
Dam man, youve never adjusted the suspension tightening nut?
its actually below the steering wheel.
You will need to take off that plastic cover below the steering wheel and look up in there with a flash light
get out a long extension with a 12 mm socket on it.
there should be a bolt up in there
turn it clockwise to tighten suspension
counterclockwise to loosen suspension
let us know how it works out
It was the best mod I ever did for my suspension!
its actually below the steering wheel.
You will need to take off that plastic cover below the steering wheel and look up in there with a flash light
get out a long extension with a 12 mm socket on it.
there should be a bolt up in there
turn it clockwise to tighten suspension
counterclockwise to loosen suspension
let us know how it works out
It was the best mod I ever did for my suspension!
Originally Posted by 95_5.0@15
**** now I know your ****tin me!!!
YOU are the NUT in between the seat and steering wheel LOL
Driver mod = best mod you can do for auto-x
Last edited by cntchds; 1/12/09 at 07:27 PM.
