2001 V6 rack and pinion in a 67 GT fastback
#1
Member
Thread Starter
Join Date: December 8, 2014
Location: St.Louis
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2001 V6 rack and pinion in a 67 GT fastback
Hey guys I have a 67 fastback and the steering is the typical old school turn the wheel like crazy and non responsive steering. I also have a 2001 v6 that I bought for a parts car and I'm thinking about taking out the steering rack and pinion from that car and putting it in my 67 along with the steering column so it's easier to get in and out as well as having the tilt feature. The car is completely custom restored so tampering with things taking them away from stock is no issue. Would this work? I feel if the overall length and the OD of the rack is the same it should! Let me know what you all think.
#2
Tasca Super Boss 429 Member
I just saw a conversion like this yesterday in a '67 Chevy.
In that car, it took a lot of fabrication to get it all to work.
Your description sounds like yours would be easier.
Great improvement in handling, hope yours won't be so difficult.
In that car, it took a lot of fabrication to get it all to work.
Your description sounds like yours would be easier.
Great improvement in handling, hope yours won't be so difficult.
Thread
Thread Starter
Forum
Replies
Last Post
Rando
2010-2014 Mustang
8
8/25/21 11:12 AM
tj@steeda
2015 - 2023 MUSTANG
0
9/24/15 08:15 PM
tj@steeda
2015 - 2023 MUSTANG
0
9/10/15 12:44 PM