Interior Map Light Housing Dress Up!!!!
10/13/06, 02:14 AM
#1
Legacy TMS Member
Thread Starter
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Interior Map Light Housing Dress Up!!!!
Check these out. I found them on MustangDepot last night. What do you guys think?? Only problem I see is that it would interfere with the factory anti theft systems senors. Here's the direct link. They have a pic there of them installed.
10/13/06, 02:27 PM
#3
GT Member
Join Date: August 14, 2006
Location: L.A. area
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
The items are made by Scott Drake...I talked with them this morning.....if the holes for the motion detector are drilled out, the alarm system will operate correctly. I suggested they might want to offer the product with pre-drilled holes for those who have the factory system
10/13/06, 08:28 PM
#7
Mach 1 Member
Join Date: August 31, 2006
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
Just thought of one more thing in that general area. You guys may have already figured out that a couple of pieces of black construction felt or whatever you call that stuff you can buy in the hobby stores...will nicely cover those screaming yellow warnings on your sun visors.
I covered them up 10 min after I drove home the car.
I covered them up 10 min after I drove home the car.
10/14/06, 09:40 AM
#9
Mach 1 Member
Join Date: March 8, 2005
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
Very nice, when they machine the Anti-Theft system holes in from the factory, I'll have them too. Wish MGW would do something like this. Of course if they did it would take them 2 years to produce it.
I would purchase if they holes were pre-drilled.
10/17/06, 08:06 AM
#20
Legacy TMS Member
Thread Starter
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
The items are made by Scott Drake...I talked with them this morning.....if the holes for the motion detector are drilled out, the alarm system will operate correctly. I suggested they might want to offer the product with pre-drilled holes for those who have the factory system