05-09 Interior and Audio Mods Enhancing Your Mustang's Interior and Sound System

'05 Shaker 500 to '08 Shaker 500

Old Sep 8, 2009 | 08:44 AM
  #1  
codeman94's Avatar
Thread Starter
 
Joined: December 14, 2004
Posts: 7,933
Likes: 16
From: Goshen, IN
'05 Shaker 500 to '08 Shaker 500

So I posted this before the hack, but never got to read any responses. Here's the deal.

I have head unit that came out of an 08, and I have noticed that the antenna connectors are different. I wanted to know if there was an adapter, and if anyone could confirm the correct adapter for this swap. thanks!
Reply
Old Sep 8, 2009 | 10:52 AM
  #2  
07S197's Avatar
Swamp Donkey Man Cans
 
Joined: August 20, 2007
Posts: 4,367
Likes: 2
From: Massachusetts
Cody,

Yeah check a site like crutchfield.com. I'm sure they will have something that can adapt the two. Pretty sure the 05 has a standard style anenna connection on the radio and at some point they went to a different style. One of the two below should get you running again.

http://www.crutchfield.com/g_119400/...s.html?tp=3339

Last edited by 07S197; Sep 8, 2009 at 10:57 AM.
Reply
Old Sep 8, 2009 | 11:37 AM
  #3  
codeman94's Avatar
Thread Starter
 
Joined: December 14, 2004
Posts: 7,933
Likes: 16
From: Goshen, IN
word on the street is it is this one... can anyone confirm?
Reply
Old Sep 9, 2009 | 01:45 PM
  #4  
Francesco's Avatar
Member
 
Joined: December 22, 2006
Posts: 24
Likes: 0
From: Germany, near Bielefeld
Yes, this is the right one...
It's called "scosche-crarb reverse antenna adapter", weird?
Reply
Old Sep 29, 2009 | 06:29 AM
  #5  
codeman94's Avatar
Thread Starter
 
Joined: December 14, 2004
Posts: 7,933
Likes: 16
From: Goshen, IN
ordered one today... will confirm upon arrival and install.
Reply
Old Oct 1, 2009 | 05:42 AM
  #6  
codeman94's Avatar
Thread Starter
 
Joined: December 14, 2004
Posts: 7,933
Likes: 16
From: Goshen, IN
Confirmed! I actually put this stereo in my 2005 Freestyle. It needed the same adapter anyway. works great!
Reply
Old Oct 1, 2009 | 09:53 AM
  #7  
codeman94's Avatar
Thread Starter
 
Joined: December 14, 2004
Posts: 7,933
Likes: 16
From: Goshen, IN
Here are directions for taking out an Old Shaker 500 for those interested.

1) Open the center console. Remove the two phillips head screws at the back of the console opening ( on top ).
2)Pull emergency brake all the way up.
3)Lift the console cover up, pull back, and work over brake handle
4)Remove screw on each side of lower center console that was covered up by the center console cover you just removed. These screws will be where the two consoles meet.
5)Remove side cover from each side. They just pop off.
6)Remove 6 bolts holding on faceplate. Unplug airbag, power port, and flashers. Unplug fan and climate control plugs. Remove face plate.
7)Remove 4 bolts holding radio in place.

Turn the directions upside down to put it all back together

NOTE: the AC connectors are Very difficult to get off.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
duppycat
General Mustang Chat
2
Feb 16, 2019 08:36 AM
Steve@CJPP
Vendor Showcase
1
Sep 15, 2015 06:20 AM
scott6809
2010-2014 Mustang
25
Sep 12, 2015 11:44 PM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 10:51 PM.