Gordon, that is correct and yes, the signals will keep sequencing, as well as hazzard lights until you turn them off.

 

Thanks for clarifying, John.

That is how I wanted them to work and I remember reading a while back it was not the case, now that everything seems to be worked out I'll order mine.

Thanks again!

 

So much for waiting until tomorrow, I just ordered my set.

 

Good job! You won't regret it!

 

Has anyone tried web electrics splice in kit for sequential turn signals? At $89 quite abit cheaper than their older one.

 

I just ordered it yesraeday. Will report back when installed. MarkHas anyone tried web electrics splice in kit for sequential turn signals? At $89 quite abit cheaper than their older one.
[/b][/quote]

 

Still waiting for my $40 refund?!?!?!?!?

 

I'm not sure why you would even ship them back for a refund. I kept mine. That way if something goofy happens to these things in a few years I can easily swap back to original.

 

same here

 

I got my $40 back. I am happy with it. I know if I have a situation down the road that web electrics will help me out. They are great.

 

I'm working on stopping the burst function. I found the grey connector.
I found the gray wire with black stripe. Not sure about the blue wire.
Is it right next to the gray wire. Its blue, but to me it looks like a pink stripe?
Help from someone that has done this. Thanks...

 

Jeff,
I did this as well, and I agree it is tuff to pick out, I did it by process of elimination. I believe if memory serves that there are only 2 other dark blue wires, if you are unsure by a simple test light (around 8.00) and test it.

According to the pinout for the connector the gray/black wire is pin 46 and the blue/orange is pin 41 I'm going to try to attach the pinout in a doc format for you.


[attachmentid=15181]

 

Thanks Gordon,

Pins 41 & 46 according to the chart says right & left front? There is several different pins that say right & left rear?

I used a multitester on the wires that I identified and got the needle to bounce back and forth when I turned on the signals. I guess I'm OK...

 

Do a search. I already posted a photos and instructions on how to do this. Here is one of the pics. The blue wire in question is show in this pic (far left wire)

 

Also here is the wiring diagrams.

 

Thankyou...
I read all the posts before I started this and was still having difficulty.

I now have the wires run back to the trunk. Just waiting now to receive the Webelectronics $89 splice in kit.

 

I just went to webelectronics web site, I just have 1 question. Do both "kits" do the same thing? I mean does the $89.00 kit and the $139.00 (After rebate) kit produce the same affect, only with more work on the $89.00 kit?

 

that is what they told me. Same thing, just a little more work. I should have mine tomorrow.. I hope

 

I bought the $139 (after rebate) and installed it today. It was very easy, but after you get the panels off and get in there, in my opinion the $89 one would be just as easy. He sends good instructions.

 

Just got done installing the $89 kit and putting the car back together.
Works fine and looks good...