PJ chrome trim on stock GT?

Reply Subscribe

Thread Tools

Search this Thread

Apr 11, 2008 | 07:00 PM

#21

Tungsten Bullitt

Legacy TMS Member

Joined: January 18, 2008

Posts: 910

Likes: 2

From: Glenview, IL

Quote:

Originally Posted by 2005mach1

hows this? just installed last night, i wanted the PJ front lip, but noooo. heritage is the best i could hope for. Still looks great, just not as aggressive.

Hey what front end is that?

Apr 11, 2008 | 07:03 PM

#22

Tungsten Bullitt

Legacy TMS Member

Joined: January 18, 2008

Posts: 910

Likes: 2

From: Glenview, IL

Quote:

Originally Posted by Boolair

I came up with my own solution to the saleen chrome trim look. It is a huge savings. The chrome attaches with 3m adhesive.
Also those chrome tail light bezels that are for sale for $70 ( to much $$) I used the same stuff on my grill, tail lights and the exhaust trim.
total cost $ 30 for the trim with the adhesive included.

Where did you get this trim?

What are the dimensions of the trim (width)?

Apr 13, 2008 | 09:46 PM

#23

Boolair

Member

Joined: August 29, 2007

Posts: 38

Likes: 0

From: Honolulu, HI

3/8" Wide Half Round, Chrome Body side molding. Sold by the Foot, 20' Roll, 50' Roll or 150' Roll. (You will only see it in Black on the website. Call them for chrome.)

I found mine here: http://www.b-dco.com/

Apr 13, 2008 | 10:35 PM

#24

Mackitraz

Mach 1 Member

Joined: December 6, 2007

Posts: 575

Likes: 11

From: Williamsburg, VA

Here's what I used. I got the truck edge trim because it was a little longer and it looked a little wider too, although I can't verify that.

Here's what I got:
http://www.partsamerica.com/ProductD...egoryCode=3209

Or, to make things easier so you can find it, or get a different kind:

The chrome edge guard measures 5/16" top to bottom and 1/4" side to side, not a chance I could get the stuff to flatten out to figure it that way, pinches really hard.

Hope that helps.