View Poll Results: Which of these 3 grilles do you like the best
Bullitt honeycomb grille
24
31.58%
CDC billett grille (9 bars)
21
27.63%
Cervini billett grille (15 bars)
29
38.16%
Shelby GT overlay
2
2.63%
Voters: 76. You may not vote on this poll
Opinions on 3 different aftermarket grilles
4/15/07, 05:54 PM
#1
Dethroned Nascar Guru
Thread Starter
Opinions on 3 (correction) 4 different aftermarket grilles
Which of the 4 photoshoped grilles do you like best?
They are illustrated in the same order as the poll.
EDIT added the Shelby GT overlay for a side-by-side comparison (far right/bottom picture) and to the pole.
They are illustrated in the same order as the poll.
EDIT added the Shelby GT overlay for a side-by-side comparison (far right/bottom picture) and to the pole.
4/15/07, 08:11 PM
#11
Mach 1 Member
Join Date: November 30, 2006
Location: Columbia, Missouri
Posts: 571
Likes: 0
Received 1 Like
on
1 Post
Blue, for your ride, I think no. 3, but my personal favorite would be no. 1 for most colors such as mine.
I am still waiting for the grill that lets you swap for rectangular fogs instead of round driving lights...
I am still waiting for the grill that lets you swap for rectangular fogs instead of round driving lights...
4/15/07, 08:31 PM
#12
Bullitt Member
Join Date: January 8, 2007
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
My vote is for the Shelby GT grill insert. It is available now. 13 bars and you reuse the GT grill. The GT grill creates a nice black textured surround for the insert. It is my favorite combination! That said, it is a real pain to grind down the GT grill.
I used a 4.5" angle grinder and a steady hand! Also, they will not sell you the pony emblem and mounting bracket. The emblem is no big deal. It is a 65-66 Mustang driver's side fender emblem. I used JB Weld to attach a stainless steel bolt to the back of then emblem and that worked great.
I used a 4.5" angle grinder and a steady hand! Also, they will not sell you the pony emblem and mounting bracket. The emblem is no big deal. It is a 65-66 Mustang driver's side fender emblem. I used JB Weld to attach a stainless steel bolt to the back of then emblem and that worked great.
4/16/07, 10:51 AM
#16
Cobra Member
The Shelby GT grill insert is available now. 13 bars and you reuse the GT grill. The GT grill creates a nice black textured surround for the insert. It is my favorite combination! That said, it is a bit of work to grind down the GT grill. I used a 4.5" angle grinder and a steady hand!
But, since that's not an option in this poll, I voted #3, since it's the closest...
4/16/07, 03:45 PM
#19
Dethroned Nascar Guru
Thread Starter
http://forums.bradbarnett.net/showth...hlight=bullitt
Some folks think the grille seen on the white car in this link from SEMA 06 is the future bullitt grille.
http://bradbarnett.net/mustangs/shows/sema06/
You just gotta wait for it.
I guess I don't know my fellow TMSers as well as I thought I did. I thought the black honeycomb grille would be the favorite by far.
4/16/07, 08:11 PM
#20
heh, Kevin says he predicted the Bullitt back in April, I did on the original TMS before the crash 
Back when the fabled 'white car' leaked photos first hit, and I got in trouble for 'exploiting' the capeability of the zoom on the NAIAS camera on the black tie(or should I say black dress) event....Ahh the good ol days of the S-197....
Back when the fabled 'white car' leaked photos first hit, and I got in trouble for 'exploiting' the capeability of the zoom on the NAIAS camera on the black tie(or should I say black dress) event....Ahh the good ol days of the S-197....