|
GT/CS chin spoiler??
I'm looking at the GT500 chin spoiler for 05-09 GT/CS front bumper, I was wondering if there is any other chin spoilers out there for the GT/CS front bumper, thanks
|
About 3 months ago I bought a GT 500 chin spoiler for my 07 GT/CS from CJ Pony Parts. Thank the Mustang Gods they take returns. It looked good in pic's but looked lousey in person. A spoiler on a spoiler--just didn't look good.
Just be aware--all the companies have free shipping, but to ship it back would have cost more than the part. 150.00 for the part with free shipping, but 165.00 to ship it back. Luck for me, I only live 3 hours from CJ Pony--took it back in person with no problem. GrumpysGT |
Originally Posted by GrumpysGT
About 3 months ago I bought a GT 500 chin spoiler for my 07 GT/CS from CJ Pony Parts. Thank the Mustang Gods they take returns. It looked good in pic's but looked lousey in person. A spoiler on a spoiler--just didn't look good.
Just be aware--all the companies have free shipping, but to ship it back would have cost more than the part. 150.00 for the part with free shipping, but 165.00 to ship it back. Luck for me, I only live 3 hours from CJ Pony--took it back in person with no problem. GrumpysGT |
Sorry, no I don't. Never permanently mounted it. Just temp. clamped it and blocked it up under the chin to get an idea of what it looked like.
GrumpysGT |
5 Attachment(s)
I trimmed the extra molded mounting serface off so my gt500 splitter would fit a little tighter. Sorry I don't have a pic of what I trimmed off, I only have finished pics....
Attachment 204431 Attachment 204432 Attachment 204433 Here is some pics that another TMS member took a while back... Attachment 204434 Attachment 204435 You can see what they trimmed off. I trimmed the sides and also went a little deeper plus I trimmed the center so the whole splitter would fit tighter. If you don't trim the splitter, well then you will have a gap and the splitter may not look as good. |
Originally Posted by Wades GT
I trimmed the extra molded mounting serface off so my gt500 splitter would fit a little tighter. Sorry I don't have a pic of what I trimmed off, I only have finished pics....
Here is some pics that another TMS member took a while back... You can see what they trimmed off. I trimmed the sides and also went a little deeper plus I trimmed the center so the whole splitter would fit tighter. If you don't trim the splitter, well then you will have a gap and the splitter may not look as good. |
I did it too
|
Lower grille
Originally Posted by Wades GT
(Post 6491758)
I trimmed the extra molded mounting serface off so my gt500 splitter would fit a little tighter. Sorry I don't have a pic of what I trimmed off, I only have finished pics....
Attachment 204431 Attachment 204432 Attachment 204433 Here is some pics that another TMS member took a while back... Attachment 204434 Attachment 204435 You can see what they trimmed off. I trimmed the sides and also went a little deeper plus I trimmed the center so the whole splitter would fit tighter. If you don't trim the splitter, well then you will have a gap and the splitter may not look as good. |
Originally Posted by Colton Keefe
(Post 7070045)
**i know its a very old thread but what lower grille and lower grille inserts are/were you running on this bumper? Where to find them or a link would be amazing too**
Closest I Could Find Here! https://www.ebay.com/itm/17414761646...4AAOSwtExVgzEQ A Bulllit Style is Nice if you are Wanting to Lose The Fogs. https://www.ebay.com/itm/17511882085...Cclp%3A2047675 KC |
Upper pics
Originally Posted by 05stangkc
(Post 7070046)
Look Like Stock GT/CS Lower Inserts Drilled out to Mount Fog Lights. Must Have Gt/Cs Fascia to Use. Do Not Recognize Billet Grille.
|
You Would Need to Cut a Section out of And Existing Billet Grille and Modify to Fit. if that is what you are wanting . I doubt but Not Sure Anything Pre Made Available for a C/S.
Here Is Wades GT Album. https://themustangsource.com/g/picture/3855693 Might Find Some Info in His Old Threads! https://themustangsource.com/forums/...archid=6736781 Kc |
This is my Old Final Pic Gt/CS & Shelby GT-500 Conversion Topic. Mostly Gt500 But if you Are Searching Gt/CS Bumper Looks There are Some in here! I actually was the Guy That Started the Bumper Conversions Back in the Day! I made Up the Gt/CS Kit Before Ford Jumped in! Be Advised Some Pics Were Lost By Funky Pic Hosting Sites.
Sold a Ton! Lots of Good SN-197 Info in My Oem Parts Section as Well. https://themustangsource.com/forums/...t-here-441685/ Enjoy, KC |
Originally Posted by 05stangkc
(Post 7070051)
This is my Old Final Pic Gt/CS & Shelby GT-500 Conversion Topic. Mostly Gt500 But if you Are Searching Gt/CS Bumper Looks There are Some in here! I actually was the Guy That Started the Bumper Conversions Back in the Day! I made Up the Gt/CS Kit Before Ford Jumped in! Be Advised Some Pics Were Lost By Funky Pic Hosting Sites.
Sold a Ton! Lots of Good SN-197 Info in My Oem Parts Section as Well. https://themustangsource.com/forums/...441685/index9/ Enjoy, KC |
Originally Posted by Colton Keefe
(Post 7070052)
**thanks, i just am putting on a 07 CS front bumper on my 05 v6, and it fits up, just now my front end looks like an airplane with thag ground clearence!!**
Enjoy, KC https://cimg5.ibsrv.net/gimg/themust...eb4cc0c717.jpg |
Originally Posted by 05stangkc
(Post 7070054)
My Gt-500 is Stock Stance with Only 33k On Her and the Only Rough Spot on her is the Lip of the factory Chin Spoiler. So Be Aware when Lowering Clearance it Comes at a Price. Parking Blocks Can Be Deadly As Well! Oh and I got to Drive up on a Couple of 2X4 Blocks to get a Floor Jack under the Front. Then There are Lifts at the Shop to Worry About! Just Saying!
Enjoy, KC |
| All times are GMT -6. The time now is 12:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands