GT/CS chin spoiler??
11/11/12, 07:27 PM
#1
Mach 1 Member
Thread Starter
GT/CS chin spoiler??
I'm looking at the GT500 chin spoiler for 05-09 GT/CS front bumper, I was wondering if there is any other chin spoilers out there for the GT/CS front bumper, thanks
11/12/12, 07:53 AM
#2
About 3 months ago I bought a GT 500 chin spoiler for my 07 GT/CS from CJ Pony Parts. Thank the Mustang Gods they take returns. It looked good in pic's but looked lousey in person. A spoiler on a spoiler--just didn't look good.
Just be aware--all the companies have free shipping, but to ship it back would have cost more than the part. 150.00 for the part with free shipping, but 165.00 to ship it back. Luck for me, I only live 3 hours from CJ Pony--took it back in person with no problem.
GrumpysGT
Just be aware--all the companies have free shipping, but to ship it back would have cost more than the part. 150.00 for the part with free shipping, but 165.00 to ship it back. Luck for me, I only live 3 hours from CJ Pony--took it back in person with no problem.
GrumpysGT
11/12/12, 11:34 AM
#3
Mach 1 Member
Thread Starter
Originally Posted by GrumpysGT
About 3 months ago I bought a GT 500 chin spoiler for my 07 GT/CS from CJ Pony Parts. Thank the Mustang Gods they take returns. It looked good in pic's but looked lousey in person. A spoiler on a spoiler--just didn't look good.
Just be aware--all the companies have free shipping, but to ship it back would have cost more than the part. 150.00 for the part with free shipping, but 165.00 to ship it back. Luck for me, I only live 3 hours from CJ Pony--took it back in person with no problem.
GrumpysGT
Just be aware--all the companies have free shipping, but to ship it back would have cost more than the part. 150.00 for the part with free shipping, but 165.00 to ship it back. Luck for me, I only live 3 hours from CJ Pony--took it back in person with no problem.
GrumpysGT
11/15/12, 05:55 PM
#5
Bullitt Member
Join Date: April 25, 2010
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
I trimmed the extra molded mounting serface off so my gt500 splitter would fit a little tighter. Sorry I don't have a pic of what I trimmed off, I only have finished pics....
Here is some pics that another TMS member took a while back...
You can see what they trimmed off. I trimmed the sides and also went a little deeper plus I trimmed the center so the whole splitter would fit tighter.
If you don't trim the splitter, well then you will have a gap and the splitter may not look as good.
Here is some pics that another TMS member took a while back...
You can see what they trimmed off. I trimmed the sides and also went a little deeper plus I trimmed the center so the whole splitter would fit tighter.
If you don't trim the splitter, well then you will have a gap and the splitter may not look as good.
11/16/12, 09:27 PM
#6
Mach 1 Member
Thread Starter
Originally Posted by Wades GT
I trimmed the extra molded mounting serface off so my gt500 splitter would fit a little tighter. Sorry I don't have a pic of what I trimmed off, I only have finished pics....
Here is some pics that another TMS member took a while back...
You can see what they trimmed off. I trimmed the sides and also went a little deeper plus I trimmed the center so the whole splitter would fit tighter.
If you don't trim the splitter, well then you will have a gap and the splitter may not look as good.
Here is some pics that another TMS member took a while back...
You can see what they trimmed off. I trimmed the sides and also went a little deeper plus I trimmed the center so the whole splitter would fit tighter.
If you don't trim the splitter, well then you will have a gap and the splitter may not look as good.
9/5/22, 03:28 PM
#8
Lower grille
I trimmed the extra molded mounting serface off so my gt500 splitter would fit a little tighter. Sorry I don't have a pic of what I trimmed off, I only have finished pics....
Attachment 204431
Attachment 204432
Attachment 204433
Here is some pics that another TMS member took a while back...
Attachment 204434
Attachment 204435
You can see what they trimmed off. I trimmed the sides and also went a little deeper plus I trimmed the center so the whole splitter would fit tighter.
If you don't trim the splitter, well then you will have a gap and the splitter may not look as good.
Attachment 204431
Attachment 204432
Attachment 204433
Here is some pics that another TMS member took a while back...
Attachment 204434
Attachment 204435
You can see what they trimmed off. I trimmed the sides and also went a little deeper plus I trimmed the center so the whole splitter would fit tighter.
If you don't trim the splitter, well then you will have a gap and the splitter may not look as good.
9/5/22, 03:42 PM
#9
Administrator, Shop Manual PDF Poster, Parts Locator & Spam Bot Eliminator!!
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,061
Received 2,507 Likes
on
1,844 Posts
Closest I Could Find Here!
https://www.ebay.com/itm/17414761646...4AAOSwtExVgzEQ
A Bulllit Style is Nice if you are Wanting to Lose The Fogs.
https://www.ebay.com/itm/17511882085...Cclp%3A2047675
KC
Last edited by 05stangkc; 9/5/22 at 03:48 PM.
9/5/22, 03:45 PM
#10
Upper pics
I was referring to the pics of the stang above that one at the top of the thread, its super dark so hard to see, and i just got a CS bumper so i wasnt familliar with how hard a non-honeycomb lower grille is to find, seems impossible
9/5/22, 03:54 PM
#11
Administrator, Shop Manual PDF Poster, Parts Locator & Spam Bot Eliminator!!
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,061
Received 2,507 Likes
on
1,844 Posts
You Would Need to Cut a Section out of And Existing Billet Grille and Modify to Fit. if that is what you are wanting . I doubt but Not Sure Anything Pre Made Available for a C/S.
Here Is Wades GT Album.
https://themustangsource.com/g/picture/3855693
Might Find Some Info in His Old Threads!
https://themustangsource.com/forums/...archid=6736781
Kc
Here Is Wades GT Album.
https://themustangsource.com/g/picture/3855693
Might Find Some Info in His Old Threads!
https://themustangsource.com/forums/...archid=6736781
Kc
Last edited by 05stangkc; 9/5/22 at 04:17 PM.
9/5/22, 04:19 PM
#12
Administrator, Shop Manual PDF Poster, Parts Locator & Spam Bot Eliminator!!
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,061
Received 2,507 Likes
on
1,844 Posts
This is my Old Final Pic Gt/CS & Shelby GT-500 Conversion Topic. Mostly Gt500 But if you Are Searching Gt/CS Bumper Looks There are Some in here! I actually was the Guy That Started the Bumper Conversions Back in the Day! I made Up the Gt/CS Kit Before Ford Jumped in! Be Advised Some Pics Were Lost By Funky Pic Hosting Sites.
Sold a Ton! Lots of Good SN-197 Info in My Oem Parts Section as Well.
https://themustangsource.com/forums/...t-here-441685/
Enjoy,
KC
Sold a Ton! Lots of Good SN-197 Info in My Oem Parts Section as Well.
https://themustangsource.com/forums/...t-here-441685/
Enjoy,
KC
Last edited by 05stangkc; 9/5/22 at 04:23 PM.
9/5/22, 04:23 PM
#13
This is my Old Final Pic Gt/CS & Shelby GT-500 Conversion Topic. Mostly Gt500 But if you Are Searching Gt/CS Bumper Looks There are Some in here! I actually was the Guy That Started the Bumper Conversions Back in the Day! I made Up the Gt/CS Kit Before Ford Jumped in! Be Advised Some Pics Were Lost By Funky Pic Hosting Sites.
Sold a Ton! Lots of Good SN-197 Info in My Oem Parts Section as Well.
https://themustangsource.com/forums/...441685/index9/
Enjoy,
KC
Sold a Ton! Lots of Good SN-197 Info in My Oem Parts Section as Well.
https://themustangsource.com/forums/...441685/index9/
Enjoy,
KC
9/5/22, 04:40 PM
#14
Administrator, Shop Manual PDF Poster, Parts Locator & Spam Bot Eliminator!!
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,061
Received 2,507 Likes
on
1,844 Posts
Enjoy,
KC
Last edited by 05stangkc; 9/5/22 at 04:44 PM.
9/5/22, 04:43 PM
#15
My Gt-500 is Stock Stance with Only 33k On Her and the Only Rough Spot on her is the Lip of the factory Chin Spoiler. So Be Aware when Lowering Clearance it Comes at a Price. Parking Blocks Can Be Deadly As Well! Oh and I got to Drive up on a Couple of 2X4 Blocks to get a Floor Jack under the Front. Then There are Lifts at the Shop to Worry About! Just Saying!
Enjoy,
KC
Enjoy,
KC
Thread
Thread Starter
Forum
Replies
Last Post
