I found this photo on Mustang World of the SEMA show. Does any one know who makes this duck tail?. It looks like a CDC or SS but notice the rear 3rd brake light hole.

 

I don't know but if you find out let me know. I really like that one. It's not the 3Dcarbon one shown here.

 

It could be the Cervinis one, but I'm not sure.

I don't think Cervini's has that rolled edge.

Actually I think it's the Ronaele one.

 

That's definitely the Xenon 3-piece spoiler like I have on my ride...

 

How do you like the Xenon one for installation and build? Also, will it cover the stock spoiler holes? It looks great!

 

I don't think it is...they sit the same on the trunk and at the brake light, but I pulled up that picture, and the picture of yours and looked at them side by side, and they look different to me. The top picture has a "rolled" looking edge to it where yours doesn't

 

Mine actually does have the same "rolled" lip you are talking about, you just can't see it in the bright sun... The picture of the car you posted has a shadow that makes the "rolled" edge more visible... I don't really have a better picture of it right now, but I will try to take one in a few days.... Here is another picture of it anyways....

 

I love the Xenon 3-piece spoiler... I get a lot of compliments on it... The quality of the product, both form and fit, is great (just make sure the parts have been sitting in the sun or a warm room before installation and that the temperature outside is above 70 degrees for the 3-M tape to adhere properly). YES, the spoiler does cover my factory holes... On the downside, it does require some drilling to attach the spoiler to your car... The center piece requires two (2) small holes on the inside edge of the trunk lid (both sides) for a pair of #8 screws... It also requires drilling a 5/16 inch hole in both rear fenders to install the 1/4 inch bolt needed to install the two side pieces of the spoiler... It seems scary to be drilling your car, but if you just take your time it really wasn't that difficult to do....

 

It's definately either the Xenon or the Ronaele, but they look remarkably similar.

Xenon

Ronaele

The only difference, and this is hard to tell from the pictures they have, is that the Xenon looks like it sticks out further from the back of the trunk.

 

it's the xenon, it even has the same back bumper.

 

Thanks for the help!. I have sat at this compuer looking at too many chocies. I am trying to do the research up front so I dont end up with a garage full of rear duck tails!

:bang:

 

I went with the Cervini's one. It covers the stock holes and is a 3 piece ducktail. My car goes to the body shop next week, so hopefully it'll be on by Christmas.

 

I like both the Xenon and the Ronaele, but does anyone know why the big difference in price?

 

Krazed,
would you mind posting some pics of the Cervini's ducktail when it gets installed?

Only pics I've seen of it were with the full bodykit or a vert. I'm seriously considering it for my Satin Silver Stang, but I wanna see how it looks on a mostly stock Mustang.

 

that is the street scenes one, i have it on my car.

 

Anyone have experience with/heard anything about the the legends rear wing from gefracing? Thanks.

 

I just ordered one, I head not to have them paint it as they do not prep it properly, but other than that they are fine. I will have my prepped and painted locally.