Wanting to swap to a Cobra front bumper. What all is needed? I know the bumper, and foglights, but are the headlights different as well?

 

This is all you will need for the bumper conversion from a GT. You don't really need the bolts and rivets from FORD. You can get them at any hardware store. Same with the wire harness...not required, just makes it easier. I am pretty sure that covers it.


Ford Part # - Description - Front End - Qty
7R3Z17D957APTM - Bumper Assy - Front - 1
7R3Z8200A - Grille/Upper - 1
7R3Z17K945AA - Grille/lower - 1
7R3Z17626AB - Lower valance panel - 1
7R3Z15200A - Fog Lamps -2
7R3Z14290EA - Foglamp Wiring (Shelby Headlight Wiring Harness) - 1
7R3Z13008B - RT Headlight Assembly - 1
7RRZ13008A - LT Headlight Assembly - 1
5R3Z16102AA - Rt Splash Shield Front - 1
5R3Z16103AA - Lt Splash Shield Front - 1
7R328C291AA - Upper Sight Shield - 1
7R3Z17C882A - Bumper Foam isolator - 1
7R3Z-17752-A - Bracket - Bumper Mounting (RH) - 1
7R3Z8B455A - Bracket Radiator Grille (RH) - 1
W711274-S439 - Nuts - 4
7R3Z-17753-A - Bracket - Bumper Mounting (LH) - 1
7R3Z8B455B - Bracket Radiator Grille (LH) - 1
W7111139-S300 - Rivets for Side Marker Lights - 6
W705589-S - Pin - 4
W302S97 - Lower valance panel Bolts - 9
W302348S300 - Lower valance panel Nuts - 9

 

http://forums.bradbarnett.net/showthread.php?t=54572

Lots o pics Here!

KC

 

how much would you estimate it costing? This is converting the front to the shelby cobra bumper but not counting the hood.

 

I did mine in May of this year. It was a total of $1500 including paint. I did the work myself. I got the bumper, upper & lower grille, headlights, foglights, and foam isolator off of ebay. I got the rest of the needed parts from Kevin (05stangkc - posted above you in this thread). I know the prices have went up since then. Contact Kevin, he can get you all of the needed parts for a good price still (I think).