I did a search and found a topic similar to this, but it didnt answer what I need to know. Can anyone tell me if the Cervini's grill will fit onto a V6 without having to get a new front facia? I tried to email them and they have yet to get back to me so any help would be appreciated.

Thanks,
Matt

 

<div class='quotetop'>QUOTE(LimeZoSo @ February 13, 2006, 10:58 AM) Quoted post</div><div class='quotemain'>
I did a search and found a topic similar to this, but it didnt answer what I need to know. Can anyone tell me if the Cervini's grill will fit onto a V6 without having to get a new front facia? I tried to email them and they have yet to get back to me so any help would be appreciated.

Thanks,
Matt
[/b][/quote]

give them a call, you'll get a quicker response....

 

I believe it does, but give them a call, they pick up right away.

 

Ok, I will do that. Thanks guys.

 

I know the Cervini billet grille fits in place of the stock grille of a GT. I'm not familiar though if the V6 and GT grilles are interchangeable. But, if you can fit a stock GT grille in place of your stock V6 grille, than you can use the Cervini grille. Definitely give them a call though to find out. Better safe than sorry.

 

Ok, just got off the phone with them. It will fit the stock V6.
Now all I need is $275!

 

On this topic, has anyone added this grill without adding a full kit?

 

If you give me some time Mark, you will get a positive response. Hopefully I will have enough money on my next pay and I will be getting one.

 

I like the sounds of that, once I can see what it looks like ona stock car Ill make my decision but I think my minds made up already. I dont like the big fogs

 

Any body know if you can move the tribar pony? I would like to see it about 2-3 horizontal bars higher (in the traditional spot)

 

I have been looking ta this grill as well. I would like to add a GT front facia to my car, but don't wanta GT grill. The V6 grill will not fit the GT facia correctly, so I have very little options at this time.
I'm still hoping someone comes along with a fogless grill for the GT with the tri bar pony or something.

 

I believe that the top grill will fit the GT bumper. I think your out of luck on the lower grill. From the looks of the emblem on my grill I think that you could move it if you like. It's held on with a bolt so some drilling might be required.

Jon

 

<div class='quotetop'>QUOTE(AFBLUE @ February 14, 2006, 9:40 PM) Quoted post</div><div class='quotemain'>
Any body know if you can move the tribar pony? I would like to see it about 2-3 horizontal bars higher (in the traditional spot)
[/b][/quote]

Yes, you can move the tribar pony or even take it off all together. I had e-mailed Cervini's a while back asking if I could order two top grilles and put one of them down below in their front bumper instead of the one with the two fogs attached. They said I could do this, so obviously they would have told me if the emblem was attached to the grille and I wouldn't have been able to use it below.

<div class='quotetop'>QUOTE(thestoogeo @ February 15, 2006, 12:05 AM) Quoted post</div><div class='quotemain'>
I believe that the top grill will fit the GT bumper. I think your out of luck on the lower grill. From the looks of the emblem on my grill I think that you could move it if you like. It's held on with a bolt so some drilling might be required.

Jon
[/b][/quote]

You could buy two of the top grilles, like I was saying above. And you could just cut one of them to fit in your stock bumper grille area, or inside the Street Scene bumper, etc. [img]style_emoticons/<#EMO_DIR#>/thumb.gif[/img]

 

bump, anyone got it without the full bumper?

 

<div class='quotetop'>QUOTE(cruisin @ March 3, 2006, 12:02 AM) Quoted post</div><div class='quotemain'>
bump, anyone got it without the full bumper?
[/b][/quote]


like this ?

The Pony is bolted on to the back side. The V6 opeing is slighly smaller the the GT and the locking tabs do not line up right.

 

sweet, i wonder if there is a gt lower replacement like that

 

Glen where did you get the replacement twin projector headlights? They look pretty cool !!I have never seen them before on a Mustang.

 

<div class='quotetop'>QUOTE(runfox @ March 4, 2006, 8:28 PM) Quoted post</div><div class='quotemain'>
Glen where did you get the replacement twin projector headlights? They look pretty cool !!I have never seen them before on a Mustang.
[/b][/quote]

I dont know where he got his exact lights, but i know that in the new catalog Moss Mustang sent me they had lights very similar to that. So i assume the lights are also for sale on their site...www.mossmustang.com

 

<div class='quotetop'>QUOTE(runfox @ March 4, 2006, 8:28 PM) Quoted post</div><div class='quotemain'>
Glen where did you get the replacement twin projector headlights? They look pretty cool !!I have never seen them before on a Mustang.
[/b][/quote]

I got mine from Ebay, by far the cheapest place to get them. Just do a search for mustang projector lights in parts & accessories.

 

Here is the exact link http://www.mossmustang.com/Shop/ViewProduc...teIndexID=51619


I've also seen them in chrome in this thread http://forums.bradbarnett.net/index.php?s=...ndpost&p=651550