06 Pony Emblems on 05 GT
9/7/05, 05:32 PM
#22
Team Mustang Source Legacy Member
Brad, I saw one and the local "stealership" and they seem HUGE in person. Although, I think they look fine in pics. I think they may be bigger than the '65 ponies. I guess they'll just take some getting used to, but if I had to choose right now, I'd go with the 99-04 ponies. Just seems like they'd be more in proportion.
Here are some pics I found. The MG one is a custom deal.
Here are some pics I found. The MG one is a custom deal.
9/7/05, 05:36 PM
#23
Team Mustang Source
Thread Starter
I asked the same question about the size. I held up the earlier pony and the 06 pony for my wife to evaluate and she liked the 06 much better. I had her hold them up and the earlier pony seemed clearly too small for my taste.
9/7/05, 09:44 PM
#24
Cobra Member
the ponies are HUGE, they are the biggest ones that ford made, IMO i think if you use the prior ones they will look really small on the fender
thats my mineral grey sixer, i had no holes so i put them closer to the bottom of the "Scoop" area, kinda like the 65/66 fastbacks
thats my mineral grey sixer, i had no holes so i put them closer to the bottom of the "Scoop" area, kinda like the 65/66 fastbacks
9/8/05, 05:48 AM
#26
Shelby GT350 Member
Join Date: May 17, 2005
Location: Chesapeake, VA
Posts: 2,072
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by StangNut@September 8, 2005, 1:10 AM
One thing that makes them look so big compared to the 65 ponies is the width. The original ones were more narrow but probably the same height.
One thing that makes them look so big compared to the 65 ponies is the width. The original ones were more narrow but probably the same height.
I just happen to have some of the 65/66 ponies and the 06 Ponies. The 06 is the bigger of the two. And the pin holes in the back are different, so there will have to be some trimming for them to fit. Also, the metal is concave on the back, so it would be harder to get double sided adhesive to stick to it.
9/8/05, 05:51 AM
#27
Shelby GT350 Member
Join Date: May 17, 2005
Location: Chesapeake, VA
Posts: 2,072
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Hatchman@September 8, 2005, 6:51 AM
I just happen to have some of the 60's ponies and the 05 Ponies. The 05 is the bigger of the two. And the pin holes in the back are different, so there will have to be some trimming for them to fit.
I just happen to have some of the 60's ponies and the 05 Ponies. The 05 is the bigger of the two. And the pin holes in the back are different, so there will have to be some trimming for them to fit.
9/8/05, 05:56 AM
#28
Shelby GT350 Member
Join Date: May 17, 2005
Location: Chesapeake, VA
Posts: 2,072
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by CHDS PNY@September 7, 2005, 10:47 PM
the ponies are HUGE, they are the biggest ones that ford made, IMO i think if you use the prior ones they will look really small on the fender
thats my mineral grey sixer, i had no holes so i put them closer to the bottom of the "Scoop" area, kinda like the 65/66 fastbacks
the ponies are HUGE, they are the biggest ones that ford made, IMO i think if you use the prior ones they will look really small on the fender
thats my mineral grey sixer, i had no holes so i put them closer to the bottom of the "Scoop" area, kinda like the 65/66 fastbacks
Nice ride, I like the Mach 1 rims, they look great on this body style.
9/8/05, 12:11 PM
#29
Team Mustang Source Legacy Member
WOW. I didn't think they were THAT much bigger.
I'd like to see a pic like that of the '06 ponies compared to the '04 ponies. Those were some small emblems.
I'd like to see a pic like that of the '06 ponies compared to the '04 ponies. Those were some small emblems.
. I live in Germany.
9/11/05, 06:20 PM
#32
Bullitt Member
Join Date: May 17, 2005
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by harrier@September 2, 2005, 11:08 PM
some ppl use dental floss between the emblem and double-sided tape. i used that on one and then thin fishing line on the other emblems. use a lot of goo gone to soften up the adhesive. and yes, using a hair dryer, heat, will also release the adhesive easier as well.
once the emblem is off the double-sided tape along with liberal doses of goo gone will promote the loosening of the tape from the car. the tape is strong. it should pull and stretch a lot but not tear hopefully. and then it will come off. soak the tape, spongue material, with the goo gone to promote realse of the adhesive.
just let it sit for a while, drenched in goo gone, if it doesn't want to come off. the goo gone loosens her up over time.
changed my "GT" trunk emblem to a pony too. that was a bear. the side fender emblems are relatively easy.
kevin also convinced me to put pony emblems inside of the doors. i love them too. last items will be pony wheel center caps.
some ppl use dental floss between the emblem and double-sided tape. i used that on one and then thin fishing line on the other emblems. use a lot of goo gone to soften up the adhesive. and yes, using a hair dryer, heat, will also release the adhesive easier as well.
once the emblem is off the double-sided tape along with liberal doses of goo gone will promote the loosening of the tape from the car. the tape is strong. it should pull and stretch a lot but not tear hopefully. and then it will come off. soak the tape, spongue material, with the goo gone to promote realse of the adhesive.
just let it sit for a while, drenched in goo gone, if it doesn't want to come off. the goo gone loosens her up over time.
changed my "GT" trunk emblem to a pony too. that was a bear. the side fender emblems are relatively easy.
kevin also convinced me to put pony emblems inside of the doors. i love them too. last items will be pony wheel center caps.
Do you have pics of the emblems inside the doors?
9/11/05, 10:07 PM
#33
Team Mustang Source Legacy Member
Originally posted by traffic142@September 11, 2005, 7:04 PM
I would like to change the gas cap GT emblem? How do you do it? where do you get the emblems from??
I would like to change the gas cap GT emblem? How do you do it? where do you get the emblems from??
I think BobWhiteDecals has some stickers you can use to cover up the GT emblem.
Thread
Thread Starter
Forum
Replies
Last Post
CiniZter
General Vehicle Discussion/News
25
4/28/16 05:41 PM