v6 throttle body spacer
#1
Cobra R Member
Thread Starter
Join Date: September 21, 2004
Posts: 1,664
Likes: 0
Received 0 Likes
on
0 Posts
#2
Up to 22 hp gains*
Up to 4 miles per gallon gains*
Up to 25 ft lb gain in Torque*
Easy installation
Quiet Operation
Performance benefits across entire power band*
Environmentally friendly with cleaner fuel burn
Fifty States Legal (C.A.R.B # D516-2)
*Performance level may vary among applications and driving style
no way IMO won't even be close to numbers they are quoting.
Up to 4 miles per gallon gains*
Up to 25 ft lb gain in Torque*
Easy installation
Quiet Operation
Performance benefits across entire power band*
Environmentally friendly with cleaner fuel burn
Fifty States Legal (C.A.R.B # D516-2)
*Performance level may vary among applications and driving style
no way IMO won't even be close to numbers they are quoting.
#3
Originally posted by Fazm@January 1, 2006, 6:24 PM
v6 4.0 throttle body spacer
just saw this on ebay, what ya guys think?
v6 4.0 throttle body spacer
just saw this on ebay, what ya guys think?
#6
OMG! I know companys like to ummm... exagerate their claims a bit... but jeepers.. that just down right laughable... results may vary... LOL! Just like my Sony digital camear that "features" a 1x optical zoom! LOL
#7
Cobra R Member
Thread Starter
Join Date: September 21, 2004
Posts: 1,664
Likes: 0
Received 0 Likes
on
0 Posts
Its just like how K&N claims up to 26rwhp. It all depends on the vehicle. I was thinkin maybe like 3-5hp and maybe a few ft/lb of torque.
for $90 its a good deal even if its only those gains.
p.s. the K&N adds just over 30 for the 03 cobra lol.
for $90 its a good deal even if its only those gains.
p.s. the K&N adds just over 30 for the 03 cobra lol.
#8
Originally posted by Fazm@January 1, 2006, 6:23 PM
Its just like how K&N claims up to 26rwhp. It all depends on the vehicle. I was thinkin maybe like 3-5hp and maybe a few ft/lb of torque.
for $90 its a good deal even if its only those gains.
p.s. the K&N adds just over 30 for the 03 cobra lol.
Its just like how K&N claims up to 26rwhp. It all depends on the vehicle. I was thinkin maybe like 3-5hp and maybe a few ft/lb of torque.
for $90 its a good deal even if its only those gains.
p.s. the K&N adds just over 30 for the 03 cobra lol.
You first! LOL
#9
I was thinkin maybe like 3-5hp and maybe a few ft/lb of torque
I am thinking any increase in HP from the above mentioned spacer might come on a bone stock V6 with no CAI or custom tune but no where near the quoted numbers..
#10
From just a spacer, amazing how these people fudge the numbers.
#11
From just a spacer, amazing how these people fudge the numbers.
This spacer is nothing new, because of the vortex swirling air a little bit per 1"I could see a slight improvement on a bone stock V6.
#12
Originally posted by rygenstormlocke@January 1, 2006, 7:21 PM
From just a spacer, amazing how these people fudge the numbers.
From just a spacer, amazing how these people fudge the numbers.
hey, my buddy, who is an mechanical engineer (at Ford of all places!) swears by the "turbonator" LOL! I just shake my head... LOL!
#13
Originally posted by scrming@January 1, 2006, 8:43 PM
hey, my buddy, who is an mechanical engineer (at Ford of all places!) swears by the "turbonator" LOL! I just shake my head... LOL!
hey, my buddy, who is an mechanical engineer (at Ford of all places!) swears by the "turbonator" LOL! I just shake my head... LOL!
#14
Cobra R Member
Thread Starter
Join Date: September 21, 2004
Posts: 1,664
Likes: 0
Received 0 Likes
on
0 Posts
I like the old turbonator things that were braking and sending blades into the throttle body and destroying engines lol.
And i want someone else to do it first lol. I just spent my $100 on something else lol.
And i want someone else to do it first lol. I just spent my $100 on something else lol.
#16
Well, in all honesty they don't actually say you will see "any" increase at all. What they do say is the gains will not exceed their "up to" posted specs. Which is gauranteed, when you think about it. And as far as "performance benefits" go that statement couldn't possibly be any more vague. Buyer beware..... Based on what Doug saw with the 4.6 TB spacer installed, I'd say keep your money in your pocket.
#18
Originally posted by Goliath@January 2, 2006, 7:31 PM
yeah I'll let someone else figure out this one on their own. I'll keep my eye on the bamachips UDP :P
yeah I'll let someone else figure out this one on their own. I'll keep my eye on the bamachips UDP :P
I'm assuming your talking about the ASP crank pulley... 4RWHP gain:
http://forums.bradbarnett.net/index.php?showtopic=41791
#19
yeah so I just saw that after posting here. I'm an now no longer looking for a UDP unless they develop something beefier than a 20% crank. While we're at it, you got any info on the MRT turbo?
#20
Originally posted by Goliath@January 2, 2006, 7:40 PM
yeah so I just saw that after posting here. I'm an now no longer looking for a UDP unless they develop something beefier than a 20% crank. While we're at it, you got any info on the MRT turbo?
yeah so I just saw that after posting here. I'm an now no longer looking for a UDP unless they develop something beefier than a 20% crank. While we're at it, you got any info on the MRT turbo?