V6 Performance Mods 2005+ Mustang V6 Performance and Technical Information

Exhaust shop guy breathing too many fumes...

Old Jul 15, 2005 | 10:48 AM
  #21  
1trickpony's Avatar
Mach 1 Member
 
Joined: May 2, 2005
Posts: 607
Likes: 0
Thank you, you figure they would update their own site. That looks like a h-pipe to me. I'm wondering how this works with the stock cats. Stock its all one piece, cats and y-pipe. It looks like they're using 2.5" pipes.
Reply
Old Jul 18, 2005 | 08:37 PM
  #22  
DanteMO's Avatar
GT Member
 
Joined: July 18, 2005
Posts: 137
Likes: 0
New forum member here... Thought I'd chime in...

I had duals put on at Meineke with Flowmasters and an h-pipe for 425 with tax. I just had them cut the bumper (scary). However, it looks really good. You cannot tell unless you get up underneath the car. I have noticed some vibration passing through 2100 RPM's and it can sound a little high pitched when you punch it and hit some high RPM's. At lower RPM's it sounds really good.

As for loss of power I can't tell. I suspect that I have lost some low end (even with the h-pipe) but I have no dyno's to confirm. For me, I was just going for the sound. I think that the perf gains or loss from a dual setup are minimal but I'm guessing. I have no tune or CAI and it's really difficult to tell due to the rev. limiter.

I do however really notice a difference in power (before the duals and after) with the AC on. It really drags. Anyone else experienced this with the AC on?
Reply
Old Jul 19, 2005 | 09:42 AM
  #23  
Tres Wright's Avatar
Cobra Member
 
Joined: May 10, 2005
Posts: 1,033
Likes: 0
I've got that exact same vibration passing 2100 that you mentioned. It's probably because they had to cut off my dampener to add the 2nd pipe, so now there's no dampening on the exhaust. The vibration isn't bad though, it's just kind of a buzz as it's passing that RPM under acceleration.

I haven't noticed any drag with the A/C on. In fact, I've been surprised at how much pep it has with the A/C on. I can't imagine what may have changed with the duals installation that would affect that, but you might try reflashing the computer to see if it helps any.
Reply
Old Jul 21, 2005 | 11:16 AM
  #24  
pony_up's Avatar
GT Member
 
Joined: May 24, 2005
Posts: 163
Likes: 0
Well our ride is at the 2nd shop today getting the exhaust re-done. Can't wait to hear it tonight with the bassanni x-pipe. I'll post an update tonight with the results...
Reply
Old Jul 22, 2005 | 06:28 AM
  #25  
pony_up's Avatar
GT Member
 
Joined: May 24, 2005
Posts: 163
Likes: 0
Picked the car up lat night and it's much, much better than the true dual setup. Nice strong rumble from the x-pipe. It has to go back in this morning for some minor tweaking but we can live with that. Overall, we're much happier now with the current setup...
Reply
Old Jul 22, 2005 | 08:27 AM
  #26  
kevinv-6's Avatar
Cobra Member
 
Joined: February 10, 2005
Posts: 1,347
Likes: 1
Originally posted by pony_up@July 21, 2005, 12:19 PM
Well our ride is at the 2nd shop today getting the exhaust re-done. Can't wait to hear it tonight with the bassanni x-pipe. I'll post an update tonight with the results...
glad to hear it worked out!! where did you getthe x pipe from?
Reply
Old Jul 23, 2005 | 08:07 AM
  #27  
pony_up's Avatar
GT Member
 
Joined: May 24, 2005
Posts: 163
Likes: 0
Originally posted by kevinv-6@July 22, 2005, 10:30 AM
glad to hear it worked out!! where did you getthe x pipe from?
Kev - got the Bassanni x-pipe from 50resto.com. Good prices and fairly fast shipping.

The car had to go back to the shop yesterday for some vibration issues but now the car is back and it's almost 100%. Runs really strong through 5K and x-pipe sounds great. Doesn't sound like the GT but it never will but it also doesn't sound like a V6 - something in between. This new shop is bringing their exhaust guy in from their other shop that's an hour away so he can tune the exhaust. Now to me, that's service.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ClayP
2010-2014 Mustang
7
Aug 11, 2015 06:23 AM
tony2014mustang
GT
4
Aug 9, 2015 03:04 PM
firstang001
'10-14 Exterior Modifications
8
Aug 4, 2015 07:43 PM
ClayP
2010-2014 Mustang
12
Aug 3, 2015 09:00 PM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 04:14 PM.