Just received my Steeda pulleys and have a question for the Auto guys. During the install did you have to get into the transmission and hold the torque converter from turning by removing the plug from the front-drivers side of the transmission and inserting a 14mm wrench???
Thanks, Kevin

 

You do have to do it in order to get the crank bolt torqued right ! It is pretty easy though, only two 13mm bolts and the converter bolts (14mm) are exposed...

 

Thanks JC.

 

Its not hard, just pop off the rubber cover, and get someone to hold the torque conver with a LONG socket, a short one could accidently fall in the bell housing.