Tillman Speed Remote Custom Tuning IS Available!
#1
Former Vendor
Thread Starter
Join Date: January 11, 2007
Location: Aston, PA
Posts: 2,594
Likes: 0
Received 0 Likes
on
0 Posts
Tillman Speed Remote Custom Tuning IS Available!
Just a quick note. We've been getting overwhelming amounts of PM's and emails asking if it would be possible for us to do remote tuning using a dyno local to you, and email tunes and results back and forth until the vehicle is completely tuned.
We absolutely CAN do remote tuning for you. We always reccommend a Dynojet dynamometer and would have no problem reccomending you to a local one.
We will use our SCT Advantage III Custom Tuning Software as well as our base maps and knowledge base obtained from our results in-house on our Dynojet 224xLC to create the ultimate custom tune for your application! Complete instructions on datalogging will be given so that we have all of the proper information to custom tune your car site-unseen!
We have done this plenty of times in the past with great results. Here is an example of our Stage I Roush package and custom tuning (keep in mind this was before race fuel and a larger heat exchanger, which we will also be remote-tuning):
http://forums.bradbarnett.net/showthread.php?t=473274
Give me a call if you have absolutely any questions regarding this service. Thanks!
Chris Rose
Tillman Speed Inc.
www.TillmanSpeed.com
In-House Dynojet 224xLC
610-497-5776 or 3736
We absolutely CAN do remote tuning for you. We always reccommend a Dynojet dynamometer and would have no problem reccomending you to a local one.
We will use our SCT Advantage III Custom Tuning Software as well as our base maps and knowledge base obtained from our results in-house on our Dynojet 224xLC to create the ultimate custom tune for your application! Complete instructions on datalogging will be given so that we have all of the proper information to custom tune your car site-unseen!
We have done this plenty of times in the past with great results. Here is an example of our Stage I Roush package and custom tuning (keep in mind this was before race fuel and a larger heat exchanger, which we will also be remote-tuning):
http://forums.bradbarnett.net/showthread.php?t=473274
Give me a call if you have absolutely any questions regarding this service. Thanks!
Chris Rose
Tillman Speed Inc.
www.TillmanSpeed.com
In-House Dynojet 224xLC
610-497-5776 or 3736
#4
Bullitt Member
Join Date: September 6, 2007
Location: Kansas City
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
I would be interested in this Chris when I get my LTs installed.
I am in kansas city and supertune performance is prolly the dyno of choice around here.
http://www.supertuneracing.com/home.html
Steve
I am in kansas city and supertune performance is prolly the dyno of choice around here.
http://www.supertuneracing.com/home.html
Steve
#5
Former Vendor
Thread Starter
Join Date: January 11, 2007
Location: Aston, PA
Posts: 2,594
Likes: 0
Received 0 Likes
on
0 Posts
Steve,
We can absolutely make that happen. If you get about an hour at that shop, I should be able to knock it out for you. As long as we have a solid email contact and phone contact so I can receive datalogs, make changes and instantly send them back.
Chris Rose
Tillman Speed Inc.
www.TillmanSpeed.com
610-497-5776
We can absolutely make that happen. If you get about an hour at that shop, I should be able to knock it out for you. As long as we have a solid email contact and phone contact so I can receive datalogs, make changes and instantly send them back.
Chris Rose
Tillman Speed Inc.
www.TillmanSpeed.com
610-497-5776
#9
Former Vendor
Thread Starter
Join Date: January 11, 2007
Location: Aston, PA
Posts: 2,594
Likes: 0
Received 0 Likes
on
0 Posts
No minimum mods required. I'll do an intake and tune remote if you want. I think you mean what modifications actually call for a dyno tune. Anything above CAI, Delete Plates and Long tubes would be WELL worth the call. Any combination at all is going to see a HUGE increase in driveability, performance, and precision.
Chris Rose
Tillman Speed Inc.
www.TillmanSpeed.com
Chris Rose
Tillman Speed Inc.
www.TillmanSpeed.com
#10
Dang Chris. This is very interesting. I'm about 2 hours from San Antonio, Houston, and Austin Texas. Any good shops in any of these cities that you'd work with on a remote tune?
#12
#13
Former Vendor
Thread Starter
Join Date: January 11, 2007
Location: Aston, PA
Posts: 2,594
Likes: 0
Received 0 Likes
on
0 Posts
Let me call around for you. Shouldn't be a problem.
Chris Rose
Tillman Speed Inc.
www.TillmanSpeed.com
610-497-5776
Chris Rose
Tillman Speed Inc.
www.TillmanSpeed.com
610-497-5776
#14
I'd love this for my car. I live in the middle of nowhere. I live in Texas (75692). i work in Shreveport, LA (71103)and as far as I know there aren't any dynos around. Let me know if there is anything close and I'll do it.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
9/8/15 10:45 AM