Off the topic, but I have a question for those of you that are running the Steeda shifter. Do your shifters have a little bit of side to side play while in gear? I'm use to the shifters in the older cars which had zero play in gear.

Ryan

 

Yes, mine does have some side to side play while in gear.

 

Thanks for the response. I bought my car with the shifter installed so I was a little curious about the play. Thanks again.

 

Well I'm getting ready to install a Pro 5.0 in the next few days. Is it fairly straight forward how those brass bushings go in? I would like to do it right the first time.

 

The directions are straight forward. I suggest, if you have some, put a little urethane bushing lube on the brass bushings when installing them. If you don't have any, a little lithium grease will work ok but it won't stay in place as long.

 

Yeah I think I might have some of that in the nightstand next to the bed!

Thanks for the tip

 

Did you guys that did the install have to drop the driveshaft? I picked up the Steeda Triax and the instructions say to drop it...hell with that LOL