Supercharged? Got one of these?
#1
Mach 1 Member
Thread Starter
Join Date: April 8, 2005
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
The folks here at TMS who purchased the WMS CAI are trying to put together a MAF extension cable and need the numbers off the bottom of the molded female connector in this setup . . . http://www.diablosport.com/MAFiaSearch.php
Any assistance would be greatly appreciated !
Any assistance would be greatly appreciated !
#4
Mach 1 Member
Thread Starter
Join Date: April 8, 2005
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 2005RedGT@October 5, 2005, 9:30 AM
Ive got one ... not tuned for it yet.
-Bryan
Ive got one ... not tuned for it yet.
-Bryan
#5
Mach 1 Member
Thread Starter
Join Date: April 8, 2005
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by subzero05@October 5, 2005, 9:36 AM
I've got one just installed last night.it sits down pretty low but I will try and get the # off of it if I can reach it without taking a bunch of stuff apart
I've got one just installed last night.it sits down pretty low but I will try and get the # off of it if I can reach it without taking a bunch of stuff apart
#6
Mach 1 Member
Thread Starter
Join Date: April 8, 2005
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
We aren't worried about the MAF side itself because the Ford harness extension we have takes care of that side, we need a male connector to plug into the original female plug that went into the MAF in the stock configuration which is why we need the numbers.
We are hoping that the end that attaches to the MAF is the large "device" with what looks like an integral connector and not the end with the basic looking plug.
What say yee?
We are hoping that the end that attaches to the MAF is the large "device" with what looks like an integral connector and not the end with the basic looking plug.
What say yee?
#8
Mach 1 Member
Thread Starter
Join Date: April 8, 2005
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by TK421@October 5, 2005, 12:35 PM
Here you go, hope this helps.
1-141 9168-2
05 61 21
Here you go, hope this helps.
1-141 9168-2
05 61 21
That number corresponds to the stock harness's connector (female-to-MAF) made by Tyco electronics , not good news for what we were trying to do.
So can I assume from this then that the connector you got the number off of goes in to the stock MAF and the other end of the MAF.i.a ties into the stock harness?
#9
GT Member
Join Date: August 27, 2004
Location: SoCal
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by The Lyin' King@October 5, 2005, 3:48 PM
So can I assume from this then that the connector you got the number off of goes in to the stock MAF and the other end of the MAF.i.a ties into the stock harness?
So can I assume from this then that the connector you got the number off of goes in to the stock MAF and the other end of the MAF.i.a ties into the stock harness?
#10
Mach 1 Member
Thread Starter
Join Date: April 8, 2005
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
#11
GT Member
Join Date: August 27, 2004
Location: SoCal
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by The Lyin' King@October 6, 2005, 9:08 AM
There wouldn't happen to be a number on the connector that goes to the stock harness?
There wouldn't happen to be a number on the connector that goes to the stock harness?
#12
Mach 1 Member
Thread Starter
Join Date: April 8, 2005
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by TK421@October 6, 2005, 11:04 AM
No, that is molded into the MAFia housing.
No, that is molded into the MAFia housing.
#13
Originally posted by TK421@October 6, 2005, 11:04 AM
No, that is molded into the MAFia housing.
No, that is molded into the MAFia housing.
Mike E
Thread
Thread Starter
Forum
Replies
Last Post
JonathonK
2005-2009 Mustang
2
9/19/15 03:19 AM