Rotorpros Cross-Drilled/Gas Slotted rotors install (w/pics)
Guys, Rich sent me an e-mail today saying to contact him via this address, sales@rotorpros.com . Of course, guess you can try giving him a call too.
Also mentioned that discounts are available if you tell him you're from TMS.
Also mentioned that discounts are available if you tell him you're from TMS.
Mach 1 Member
Joined: December 12, 2004
Posts: 674
Likes: 0
Rafael what info are you looking for?
By the way guys just to tell you know what a great deal Richard offers on these rotors. I have a source that i buy the Centric brand of rotors from as stock replacments. So I decided to call them and get a price from them figuring of course i would be able to get a lower price. Well for what it would cost me to buy just the Fronts alone Richard is selling all 4. Needless to say when i informed my source of the price he about fell out of his chair.
Richard
By the way guys just to tell you know what a great deal Richard offers on these rotors. I have a source that i buy the Centric brand of rotors from as stock replacments. So I decided to call them and get a price from them figuring of course i would be able to get a lower price. Well for what it would cost me to buy just the Fronts alone Richard is selling all 4. Needless to say when i informed my source of the price he about fell out of his chair.
Richard
Mach 1 Member
Joined: December 12, 2004
Posts: 674
Likes: 0
Cool.. thanks Richard for the info. I'll have to give him a call during the week. I wonder if I should bother to order them zinc coated or not. I read somewhere else where someone painted theres with some high temp paint I think to cover up all the holes and the inside of the slots. WOnder if that would be better cause I dont want to have to deal with rust later.
Legacy TMS Member
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Rich at Rotopro sent me an email back with great pricing for a set of drilled and slotted rotors and premium pads. Placed the order last night.
Scott
Scott
Legacy TMS Member
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Legacy TMS Member
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
Shut up, I know I know. I am trying so hard to save for an intercooler. Although I did go to a local show this weekend and didn't place, while an '05 GT that almost looked more like an import did place (20" wheels, aluminum mesh grilles, etc.) That has me thinking back to appearance mods but then again some of the judges have weird senses of style so who knows........ I'll stick to performance.
Team Mustang Source
Joined: June 19, 2004
Posts: 6,840
Likes: 2
From: Phoenixville, PA
Shut up, I know I know. I am trying so hard to save for an intercooler. Although I did go to a local show this weekend and didn't place, while an '05 GT that almost looked more like an import did place (20" wheels, aluminum mesh grilles, etc.) That has me thinking back to appearance mods but then again some of the judges have weird senses of style so who knows........ I'll stick to performance.
Mach 1 Member
Joined: December 12, 2004
Posts: 674
Likes: 0
Cobra Member
Joined: September 4, 2006
Posts: 1,202
Likes: 1
From: Nor-Cal
Tom, don't fret buddy. All shows are different, and depending on the show, its a crap shoot. Some are judged by fellow participants, others by real judges. Just this past weekend, I went to a show, and came in 3rd, behind a factory 5 Cobra (which looked good, but not the best). Now this show was all peer judged, so appearance mods mattered the most I guess, as I beat a friend who has a Whipple in his GT.
I do recall him giving me a price on the pads and i want to say 80.00 but i honestly do not remeber.
Richard
Team Mustang Source
Joined: June 19, 2004
Posts: 6,840
Likes: 2
From: Phoenixville, PA
Cobra Member
Joined: January 4, 2005
Posts: 1,010
Likes: 1
From: 'neath a cactus
When I purchased my RotorPro's CTEK rotors and pads I think the total price quoted to me was $330...
Legacy TMS Member
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Legacy TMS Member
Joined: January 9, 2005
Posts: 6,982
Likes: 6
From: New Carlisle, Ohio (20 miles north of Dayton)
Shut up, I know I know. I am trying so hard to save for an intercooler. Although I did go to a local show this weekend and didn't place, while an '05 GT that almost looked more like an import did place (20" wheels, aluminum mesh grilles, etc.) That has me thinking back to appearance mods but then again some of the judges have weird senses of style so who knows........ I'll stick to performance.
Never enough money for mods... is there? Once you get all that big power you know you gotta stop it. I hope you have your intercooler by Brenspeeds fall dyno day or there will be no living with you. 
Scott
Legacy TMS Member
Joined: October 8, 2005
Posts: 12,395
Likes: 29
From: Medina county, OH
LOL, yeah you're right Scott. Oh and to be fair, it's not just the intercooler, but a smaller pulley too........
Just want to get to 450 rwhp with my 18" tires and do it safely. Anyway, enough about me, back to topic guys. Let me know when you get the rotors Scott, I still want to see them.
Bullitt Member
Joined: November 13, 2006
Posts: 357
Likes: 1
From: Fort Mill, SC
I know I've posted this pic on other threads before, but if you haven't seen it....here's my Rotorpro zinc-plated, drilled & slotted rotors with red hubs. They have been on the car over 6 months and have at least 5k miles on them. So far no rust, and they still look great. I think I paid $340 including the red hub paint. IMO, best rotors for the money.