New personal best in my 05 GT
#1
New personal best in my 05 GT
Went down to the SSOTN Nats at Cecil today. It was rained out last week and they were able to slip it in between snow storms today. It was in the high 30's and the track had some bite
My old best was a 12.42@110 with a 1.75 60 foot in my 05 GT
New Best
1.709 60 foot
7.87@88.12 in the 1/8th
12.300@111.39 !!
Mods are 4:10 gears, aluminum DS, BMR control arms, JLT cold air, my own SCT tune, BBK X pipe with Cats, FRPP axle back and MT 275 40 17 drag radials. Only change from last time out was the BMR control arms. I think there is more left in the 60 foot too.
I really wanted a 12.29 but I will take the 12.30. My goal is to be the fastest S197 on a bone stock motor. I have a stock TB, stock CMCV plates, etc. Even still have stock headers and cats.
My old best was a 12.42@110 with a 1.75 60 foot in my 05 GT
New Best
1.709 60 foot
7.87@88.12 in the 1/8th
12.300@111.39 !!
Mods are 4:10 gears, aluminum DS, BMR control arms, JLT cold air, my own SCT tune, BBK X pipe with Cats, FRPP axle back and MT 275 40 17 drag radials. Only change from last time out was the BMR control arms. I think there is more left in the 60 foot too.
I really wanted a 12.29 but I will take the 12.30. My goal is to be the fastest S197 on a bone stock motor. I have a stock TB, stock CMCV plates, etc. Even still have stock headers and cats.
#8
Legacy TMS Member
Went down to the SSOTN Nats at Cecil today. It was rained out last week and they were able to slip it in between snow storms today. It was in the high 30's and the track had some bite
My old best was a 12.42@110 with a 1.75 60 foot in my 05 GT
New Best
1.709 60 foot
7.87@88.12 in the 1/8th
12.300@111.39 !!
Mods are 4:10 gears, aluminum DS, BMR control arms, JLT cold air, my own SCT tune, BBK X pipe with Cats, FRPP axle back and MT 275 40 17 drag radials. Only change from last time out was the BMR control arms. I think there is more left in the 60 foot too.
I really wanted a 12.29 but I will take the 12.30. My goal is to be the fastest S197 on a bone stock motor. I have a stock TB, stock CMCV plates, etc. Even still have stock headers and cats.
My old best was a 12.42@110 with a 1.75 60 foot in my 05 GT
New Best
1.709 60 foot
7.87@88.12 in the 1/8th
12.300@111.39 !!
Mods are 4:10 gears, aluminum DS, BMR control arms, JLT cold air, my own SCT tune, BBK X pipe with Cats, FRPP axle back and MT 275 40 17 drag radials. Only change from last time out was the BMR control arms. I think there is more left in the 60 foot too.
I really wanted a 12.29 but I will take the 12.30. My goal is to be the fastest S197 on a bone stock motor. I have a stock TB, stock CMCV plates, etc. Even still have stock headers and cats.
Its until I see a slip, then it becomes jealousy, lol. But then I might call error in the timing system, hehe.
#10
Doesnt seem to fit the shoe. I cant see that fast with no cams, no n20, no blower, no extreme weight shaving. I dont have 4:10's but 3:55's nor an alum shaft, but do have pullies. I call bs on .5 faster.
Its until I see a slip, then it becomes jealousy, lol. But then I might call error in the timing system, hehe.
Its until I see a slip, then it becomes jealousy, lol. But then I might call error in the timing system, hehe.
Last edited by qwik huh; 11/24/08 at 08:01 AM.
#11
Doesnt seem to fit the shoe. I cant see that fast with no cams, no n20, no blower, no extreme weight shaving. I dont have 4:10's but 3:55's nor an alum shaft, but do have pullies. I call bs on .5 faster.
Its until I see a slip, then it becomes jealousy, lol. But then I might call error in the timing system, hehe.
Its until I see a slip, then it becomes jealousy, lol. But then I might call error in the timing system, hehe.
Last edited by qwik huh; 11/28/08 at 07:26 AM.
#15
Mods are 4:10 gears, aluminum DS, BMR control arms, JLT cold air, my own SCT tune, BBK X pipe with Cats, FRPP axle back and MT 275 40 17 drag radials.
My goal is to be the fastest S197 on a bone stock motor. I have a stock TB, stock CMCV plates, etc. Even still have stock headers and cats.
My goal is to be the fastest S197 on a bone stock motor. I have a stock TB, stock CMCV plates, etc. Even still have stock headers and cats.
**** nice runs!!
#17
My point is an untouched engine from throttle body to pan. At this point it even has stock exhaust manifolds on it. A tune allows the engine to operate more efficiently but the engine remains stock. The CAI kits just gets more air into the engine. I see your point and this is one of those things that can be argued to death. My goal is just to run the number with no throttlebody changes, no delete plates, no cams, etc.
#18
#19
Tasca Super Boss 429 Member
Join Date: November 14, 2007
Location: Pacific NW USA
Posts: 3,652
Likes: 0
Received 8 Likes
on
6 Posts
My point is an untouched engine from throttle body to pan. At this point it even has stock exhaust manifolds on it. A tune allows the engine to operate more efficiently but the engine remains stock. The CAI kits just gets more air into the engine. I see your point and this is one of those things that can be argued to death. My goal is just to run the number with no throttlebody changes, no delete plates, no cams, etc.
Bone stock is a loosely used term in all internet forums and bench-racing, in general, and must be taken with a grain of salt. However, your N/A modded GT is certainly one of the quickest examples with such limited bolt-ons, so my hat's off to you.