Increased road noise from aluminum driveshaft?
#1
Team Mustang Source
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: April 6, 2004
Posts: 873
Likes: 0
Received 0 Likes
on
0 Posts
Increased road noise from aluminum driveshaft?
Had a powerhouse aluminum driveshaft installed in my car and noticed that I could clearly hear it rotating plus noise from the engine and tranny traveling into the car. Do others have this as well? It dosn't really bother me but I had the powerhouse V6 one in ym last car and don't remember hearign anything.
#6
Team Mustang Source
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: January 15, 2005
Location: So. FL
Posts: 1,426
Likes: 0
Received 0 Likes
on
0 Posts
Another Spydershaft here, without noise. And for the record, my car is not lowered and only changes to my rear suspension are BMR tubular LCAs w/poly bushings, GMS Adjustable UCA w/poly bushings too. And my pinion angle is within specs (checked by Steeda).
Last edited by SoFlaBoss; 7/22/08 at 02:52 PM.
#9
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: January 20, 2006
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
I have been running the Powerhose driveshaft for two years with no noise or vibrations tested up to 168 MPH.
It is quieter than the OEM driveshaft as it never clunks.
It is quieter than the OEM driveshaft as it never clunks.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
9/16/15 06:44 PM
robjh22
Suspension, Brakes, and Tire Tech
4
9/8/15 12:31 PM