Just installed Tokico D-specs and have a question on adjusting them. On the front there are chrome caps with a hole in the top. Do I insert the tool into this hole to adjust or do I take the chrome cap off and then adjust?

 

My fronts have plastic caps (well onl y one is left), but perhaps they have changed the design? My rears have solid steel caps. Unless there is a access hole thru the center of the cap, then the cap may need to be removed so you can insert the adjustment tool, which is really just a fancy looking allen wrench.

 

yes remove the cap (steel or plastic caps) and insert the allen wrench tool into the top of the strut to adjust.

 

+1......

 

Thanks all the hole in the metal cap (front) threw me. The key chain tool fits in the hole...but wasn't doing anything.

Removed the cap and worked like a charm!

 

...and make sure you keep that key chain somewhere you'll find it back! I lost mine once and luckily found it at the very last minute. Was about to buy another one from Stang Suspension. They sell them for $29 I believe.

 

Mine stays in the center console.

 

Its just a 3mm allen wrench with a fancy handle so you could put it on a key chain.

 

I wear mine around my neck.....