Car is screwed
#1
Legacy TMS Member
Thread Starter
Join Date: May 1, 2007
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Car is screwed
I had been researching superchargers ever since I bought my stang back in April. After saving up for a few months I was finally able to break down and buy one.
I decided on a Whipple 500HO supercharger. It was installed by CJPonyparts in Harrisburg PA.
Unfortunately there arent any mustang knowledged-based installers in this area and before I took the car over 200 miles away I wanted to make sure the installer was worthy. I would like to thank Torrence for answering all the questions I had regarding the quality of workmanship at CJponyparts. I would also like to thank Bill @ cjponyparts for putting up with my emails over the course of the install.
The price for the blower, install, and dyno simply could NOT be beaten by any other vendor/installer I had checked with on this and other mustang sites.
The car was 'safely' tuned by SGS automotive to a sum of 493rwhp @6400rpm and 437 ftlb tq @5k rpm
The only issue I had was the dyno shop ripped the wires out of both front ABS sensors when the car was strapped to the dyno. The guys at CJ's tried to get replacements from a local ford dealer but they were out of stock so they took 2 replacements from one of their personal mustangs and sent me on my way. Unfortunately it was snowing most of my 200 mile trip back home so I didnt get too many chances to get on the car until I got onto some dry roads near the NY-PA border. I was able to get on it a bit and I was simply AMAZED!
I couldnt be happier with how AWESOME this car is and hope to someday build up the bottom end of the motor and make this car an absolute monster.
Enjoy the pictures
I decided on a Whipple 500HO supercharger. It was installed by CJPonyparts in Harrisburg PA.
Unfortunately there arent any mustang knowledged-based installers in this area and before I took the car over 200 miles away I wanted to make sure the installer was worthy. I would like to thank Torrence for answering all the questions I had regarding the quality of workmanship at CJponyparts. I would also like to thank Bill @ cjponyparts for putting up with my emails over the course of the install.
The price for the blower, install, and dyno simply could NOT be beaten by any other vendor/installer I had checked with on this and other mustang sites.
The car was 'safely' tuned by SGS automotive to a sum of 493rwhp @6400rpm and 437 ftlb tq @5k rpm
The only issue I had was the dyno shop ripped the wires out of both front ABS sensors when the car was strapped to the dyno. The guys at CJ's tried to get replacements from a local ford dealer but they were out of stock so they took 2 replacements from one of their personal mustangs and sent me on my way. Unfortunately it was snowing most of my 200 mile trip back home so I didnt get too many chances to get on the car until I got onto some dry roads near the NY-PA border. I was able to get on it a bit and I was simply AMAZED!
I couldnt be happier with how AWESOME this car is and hope to someday build up the bottom end of the motor and make this car an absolute monster.
Enjoy the pictures
#2
NTTAWWT
Wow, I feel stupid...I guess it's just because Im so tired, but I didnt get the "screwed" part until about half way in.
#4
Shelby GT350 Member
Congrats and welcome to the club ... I remember how it felt when I picked my car up and got on it for the first time. I asked the guy's at Steeda if they had anything to get this off my face ...
#5
Super Boss Lawman Member
#9
Mach 1 Member
Join Date: June 28, 2006
Location: Staten Island, NY
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
ah yes.......envy.......one of the seven deadly sins. not as deadly as that mustang though. i wish i could afford a whipple but just aint gonna happen. just curious on how much they charged for the whole deal though.
#10
Congrats! I hope to join the club soon.
#12
Legacy TMS Member
#15
Legacy TMS Member
Thread Starter
Join Date: May 1, 2007
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Install was 12 hours and the dyno was 3. The only reason I left the car with them for 2 weeks was it was tough for me to find someone to follow me down and back as CJ's is 200 miles from me.
#19
I had been researching superchargers ever since I bought my stang back in April. After saving up for a few months I was finally able to break down and buy one.
I decided on a Whipple 500HO supercharger. It was installed by CJPonyparts in Harrisburg PA.
Unfortunately there arent any mustang knowledged-based installers in this area and before I took the car over 200 miles away I wanted to make sure the installer was worthy. I would like to thank Torrence for answering all the questions I had regarding the quality of workmanship at CJponyparts. I would also like to thank Bill @ cjponyparts for putting up with my emails over the course of the install.
The price for the blower, install, and dyno simply could NOT be beaten by any other vendor/installer I had checked with on this and other mustang sites.
The car was 'safely' tuned by SGS automotive to a sum of 493rwhp @6400rpm and 437 ftlb tq @5k rpm
The only issue I had was the dyno shop ripped the wires out of both front ABS sensors when the car was strapped to the dyno. The guys at CJ's tried to get replacements from a local ford dealer but they were out of stock so they took 2 replacements from one of their personal mustangs and sent me on my way. Unfortunately it was snowing most of my 200 mile trip back home so I didnt get too many chances to get on the car until I got onto some dry roads near the NY-PA border. I was able to get on it a bit and I was simply AMAZED!
I couldnt be happier with how AWESOME this car is and hope to someday build up the bottom end of the motor and make this car an absolute monster.
Enjoy the pictures
I decided on a Whipple 500HO supercharger. It was installed by CJPonyparts in Harrisburg PA.
Unfortunately there arent any mustang knowledged-based installers in this area and before I took the car over 200 miles away I wanted to make sure the installer was worthy. I would like to thank Torrence for answering all the questions I had regarding the quality of workmanship at CJponyparts. I would also like to thank Bill @ cjponyparts for putting up with my emails over the course of the install.
The price for the blower, install, and dyno simply could NOT be beaten by any other vendor/installer I had checked with on this and other mustang sites.
The car was 'safely' tuned by SGS automotive to a sum of 493rwhp @6400rpm and 437 ftlb tq @5k rpm
The only issue I had was the dyno shop ripped the wires out of both front ABS sensors when the car was strapped to the dyno. The guys at CJ's tried to get replacements from a local ford dealer but they were out of stock so they took 2 replacements from one of their personal mustangs and sent me on my way. Unfortunately it was snowing most of my 200 mile trip back home so I didnt get too many chances to get on the car until I got onto some dry roads near the NY-PA border. I was able to get on it a bit and I was simply AMAZED!
I couldnt be happier with how AWESOME this car is and hope to someday build up the bottom end of the motor and make this car an absolute monster.
Enjoy the pictures
No problem John, that's why we are all here, to help each other out....
We gotta go run these bad boys at some point.
Enjoy and the stang looks SWEET